Search results

I have torn into many Sterling 10.25 rear ends. But I have never had one fight me like this. I beat the ever loving snot out of it and it would not budge. I even damaged the hub and flange. The bad thing is I had both shafts out a few weeks ago when I did the brakes. I finally ran out of time...

Will a drop in bed liner from a 99 and up F 2 and 350 fit the 98 and below F series? And, will the 97 and up F150, fit the old body style Fords?

This Ram Charger has been sitting for several years. The 360 in it is locked up, not seized up, from sitting. It will not take much to get it running again. There is some body damage and broken glass from a tree falling down the side of it. It is easy to fix and it's not structural. Even though...

I need a good used gauge cluster for my 2003 Ranger. I borrowed one from a friends' truck and it fixed my problems. But now I have to give it back. Pictured below is the one I borrowed, it is identical to the one I need. Let me know what you want with shipping and to 31907 in Georgia. My truck...

I am trying to help an elderly woman that lives down the road. She got sick when she was out somewhere and had to be hospitalized for a few months. Her 1990 front wheel drive Cadillac was towed to her house. From what I am understanding, when she returned there was something wrong with it and it...

I found this in the back of an old Ram Charger. It is new and from what I can tell it has never been installed. The guy I got it from said it fits a K5 Blazer. But I looked them up and the examples I found on line look nothing like this. So, because it was in the back of a Ram Charger I figured...

I have been looking at pneumatic diaphragm pumps for moving my dirty oil. I have found some on eBay that are pretty affordable. I am wondering is a $250 pump is going to work. That being said, I was looking at an electric sewage pump the other day at Harbor Freight. Plugging the pump into an...

I picked up a 98 Nissan Altima but it has no key. I want to load it on my car trailer but I cannot get it in neutral. How can I get this car to roll freely on site?

I am not much of a Chevy guy so I need some help with this intake. I know it is for a SBC but I cannot find any parts number on it. Any input?

The winch on my trailer stopped working. I narrowed the problem, down to the control box. I am assuming it is a relay in there that has gone bad. I saw someone with a large three way switch on their trailer winch. In, out, and off that is all. It was like a large toggle switch. Does anyone know...

We needed something to drag our trailer until I get my dually put back together. Stumbled across this 350 almost by accident and got a screaming deal. Yes, it needs some work. Nothing real serious though. The body is pretty good with only one real dent to contend with. Just some lipstick and...

I have three trucks that appear to have IP issues. Getting someone to look at them who know what they are doing is impossible. I HAVE to have these trucks running. I know IPs run on pixy dust and unicorn poop. So I need to take the mystery out of them. I have looked on line but could not find...

Back when I started researching the HEI upgrade I read the Ford coil is a better choice than the GM coil. I picked up several of each from the salvage yard along with all the wiring, connectors and bracketry. I plan to get it all mocked up and running with the junk yard parts then replace with...

I am doing this to my old Dodge But these are the parts I have to work with. I want to sue the HEI modules I have because they will have cleaner install. I like the single plug in connector The problem is I do not know which wire is which. I need help deciphering the pins so I can wire...

I pulled this dash out of a parts car because it was pretty close to perfect. Mine is shredded from the sun. During the removal this happened. I did not realize it was so brittle. I know if I let this go it will look like the dash I am replacing in no time. What can I do to not only stop it from...

This listing includes all the parts you need to convert your Ford Super Duty from a single rear wheel to a dual rear wheel. All the tires are in great shape and hold air fine.

I am trying to get the linkage on my 2BBL 318 hooked back up but I am running into some problems. The throttle cable is just not going back in like it should. I have either put something together wrong, am missing something or just not seeing how it went together in the first place. Does anyone...

Does anyone have a photograph of the bracket and other pieces that hold this jack in place? Also, what other parts or tools go with it? This is for my 86 regular cab Ranger. I want to track down all the correct OE pieces so it all fits like it should.

I just received these auto locking hubs for the D27 on my 86 Ranger. I am converting it back to auto locking hubs. It has been a while since I have messed with these. And when I did I was getting rid of them in favor for manual hubs. I want to make sure I have ALL the parts I need to make them...

I am looking for a good and compete set of factory auto locking hubs for my 86 Ranger with a D28. And I do mean I need every piece and part that makes them work. I am converting my Ranger back to auto lockers.

I run dual in and dual out mufflers on most of my trucks because of the limited space. Most of them have the exhaust running down the passenger side so I see no reason for two mufflers when one would do the job. However, I am about to get yet another dual in and dual out for the Ranger I just...

My STX build got side lined when someone pulled out in front of me. Now it is a total teardown type build. So until I can get to that I picked up this XL to get me by. It is in pretty good shape. It did 80 down the interstate like a champ. It does not need much to be a nice daily driver. A...

A few months back I lost a cousin. He was a great guy and was taken from us far too soon. While we were up for the funeral his wife told me I should take his old Massy. I agreed and set forward on the plans to return with a trailer. Here is the catch though; he had taken it apart to do some work...

I am weighing my options on which engine to stab into my 72 Dodge D200 build. I do not know much about the Magnums and I think I may want to use one to replace my original 318. I want this truck to be a daily driver and pull trailers. Reliability and fuel consumption are my priorities. Moe than...

I thought this was going to be an easy search. I have used battery cut off switches many times in the past. But I think I might be looking in the wrong direction. I have looked at page after page of cutoff switches and the selections in the parts stores is terrible. So here is the plan. I am...