Another Big 3 Upgrade on the Way!

[Bigredmariner]

Project's looking good Matt. Nice work on them solder joints.

 

[mblouir]

Project's looking good Matt. Nice work on them solder joints.

Thanks, J-Rod. I hope it helps some people that want to do this. One thing I'm big on is crimping and soldering. The propane torch definitely helps as it's difficult to solder 1/0 with regular methods. I made the soldered sections pretty.

 

[Z71 Kris]

they do look better then mine...

 

[KillaF150]

Now i'm wanting to do this!
great write up matt!

 

[mblouir]

they do look better then mine...

What did you use to solder? Also keep in mind I'm OCD about everything with my truck.

Now i'm wanting to do this!
great write up matt!

Write-up isn't here yet, big man. But it will be in an hour or so.

 

[Z71 Kris]

just propane, and electrical solder

 

[mblouir]

Gotcha.



Finishing the write-up as we speak. Everything's installed.

 

[mblouir]

Write-up is going in the Tech How-to section in about 30 minutes......be on the lookout.

 

[gmctrucks]

Say guys this might help one out my son-in-law was telling me that Napa sells lead pellets and the fittings so when doing the BIG THREE all you need to do is heat up the lead pellets with propane torch and you will have your thicker gauge wire ready to bolt on nice and tight.

 

[dietz4ibanez]