yes they do have those, and many people have used, they just cost a little more then the standard terminals..
Well, the thread is over a year old I need to upgrade my wires in my truck... And add a second battery.
Im looking for some wire/cable to do my BIG 3 set up I know it would help me out since I have under drive pulleys also at night all my lights get dim when stopped. I even put on a high flow water pump due to my pump was turning slower at idle in this Texas heat one needs good flow of water I tell you the pump really does put out more water I like it very much.
Hey guys I bought some ground cables already all made up all I need to do is buy the connectors that go on the battery post. I also found why my starter is giving me problems when my truck gets hot or at least im pretty sure it's this. Today while I was cutting back on the small wire coming off the positive cable going into my cab that powers the key switch I found it has green crap in the cable I cut it back around six inches but it still had green crap in the wire or power cable im going to have my buddy replace all the wire. I used a marine butt connector but when he does it im going to have him soldier the wire and place some heat shrink over it. The cables I bought are: 8.5", 15", 17", 21.5", and 28" I paid $20.00 dollars for them. I think I did good. Roland
Sound Quest 1/0 GAUGE ULTRA HIGH CURRENT POWER WIRE It should do right?? Hey guys I know of this other guy that has 0 gauge wire with connectors for the Big 3 if anyone wants the info PM me. Be safe! Roland