Trans cooler over kill?

[Wyley87]

I've only put 60k on it since I got it. Not sure when it was changed.


Sent from my iPhone 4s

 

[Wyley87]

Called my dad he said he changed it a while back before i got it.


Sent from my iPhone 4s

 

[Wyley87]

Ok just got home
Tested catch it works fine.

I took some measurements and it appears i Have the space for a bracket out of some aluminum angle. Also I plan on moving the cooler to the driver side.

What sizes of aluminum angle do they have at home depot/lowes?


Sent from my iPhone 4s

 

[Wyley87]

Clutch*


Sent from my iPhone 4s

 

[Wyley87]

Also how do I go about cleaning the condenser? Power washer at car wash?


Sent from my iPhone 4s

 

[Zembonez]

Don't hit the condenser with high pressure. It can flatten the fins. Best to take a hose to it and use a soft paint brush and some soap. It works great!

 

[Wyley87]

K I'll do that instead. Lol


Sent from my iPhone 4s

 

[txab]

Use simple green or equivalent. Soak the fins and let it sit and soften the bug guts. May take a couple of applications. Then low pressure water flush. As Zem said use a brush. Look between the condenser and radiator too. You can usually separate the two enough to clean the front side of the rad. Bugs and crap can travel through the cond. and then get lodged in the rad.

 

[Wyley87]

K what about the little rocks and shit?


Sent from my iPhone 4s

 

[txab]

Get out what you can without damaging the units. You can try air pressure from the backside to dislodge some material..... as long as you can separate the two units enough. Some of those little rocks will just stay.