Who cares about the roof since you are caging it...?
Looks good. Thanks for the pics, now this thread doesn't suck so much pubes.
Looks good. Thanks for the pics, now this thread doesn't suck so much pubes.
Project Battle Notch
- Thread starter LMSeven
- Start date
LMSeven
Μολών λαβέ
Here's the passenger fender, all the rusted areas are behind a piece of plastic trim so that entire part of the fender will be hidden. I'm not sure if it's going to be filled or just blasted and sealed. Got about halfway done with the drivers side. These had several layers so it took a while.
The under and back sides are getting blasted. You can't blast stuff on the outside because it warps metal in weaker areas.
The under and back sides are getting blasted. You can't blast stuff on the outside because it warps metal in weaker areas.
LMSeven
Μολών λαβέ
Because the roof will be out of whack and look retarded and uneven without the correct roof support.
He's the guy with the 'tard grille, don't mind him.
LMSeven
Μολών λαβέ
It's all his fault this is even happening 
svensk
TMC's official Zombie Slayer
bondo queen.
LMSeven
Μολών λαβέ
That was before the LS engine was gifted to humanity from the heavens
Bondo is for making panels straight not reversing oxidation, imo. That hole is behind uber cool trim so it doesn't really matter, once it's down to bare metal and sealed it isn't going to rust. It isn't worth buying a new fender fo sho.
Bondo is for making panels straight not reversing oxidation, imo. That hole is behind uber cool trim so it doesn't really matter, once it's down to bare metal and sealed it isn't going to rust. It isn't worth buying a new fender fo sho.
Says the guy who drives a vagina-mobile....
quoted for troofThat was before the LS engine was gifted to humanity from the heavens
