Looky what I got rigged up on my GMT400

[GMtruckfan]

I hauled 20-25ft aluminum catwalk with it yesterday. Should shorten it or just another gm truck that has a 8 ft bed then fix up all scratches gmt400 from hauling stuff. It fits a gmsquarebody truck.

Missing a few words there, but I would say shorten it, narrow it and make it fit properly in the stake holes of that bed. Do you plan on buying a "gmsquarebody"? I assume you mean a 72-87 C/K with an 8' bed.

That is just heinous, as is. I am not sure why you would assume that strap would be secure enough.

 

[BlueCollarPilot]

He should at least put a rag under the ratchet, so as not to scratch the paint.

 

[PenguinLTZ]

He should at least put a rag under the ratchet, so as not to scratch the paint.

I just noticed the pressure on that hood. See where it is bowed at the fenders?

 

[BlueCollarPilot]

yup

 

[hotrodpc]

What if he just sealed the ends and filled it with helium?

What if he just sealed the ends and filled it with helium?

But then it'd come out of the bed. Good thought though.

That's exactly what I thought. Either that, lift the rear wheels off the ground and he'd be going nowhere then. Oh nevermind it's a 4x4 , Tcase in 4 High. He's got this !!!

 

[hotrodpc]

He should at least put a rag under the ratchet, so as not to scratch the paint.

I just noticed the pressure on that hood. See where it is bowed at the fenders?

yup

Yikes, I see that now too. Whooda thunk a rack on the back could damage the front of a truck??? Not Dave. Oh wait....

 

[PenguinLTZ]

All jokes aside. Dave, did it do any damage to that hood? Did everything relax back to normal? This front edge looks like it got pushed down past the hood stops:

 

[ScottyBoy]

I am guessing ladder rack mounting wasn't covered by the teacher at your Mechanic school.
Apparently neither was common sense.

 

[Alljackedup408]

I am guessing ladder rack mounting wasn't covered by the teacher at your Mechanic school.
Apparently neither was common sense.

Lmao. Haha.

Alljackedup Samsung

 

[davbell22602]

All jokes aside. Dave, did it do any damage to that hood? Did everything relax back to normal? This front edge looks like it got pushed down past the hood stops:

The spot on the hood was from fall 2010 accident I was in from that non license driver.

Sent from my Milestone X2 using Tapatalk 2