Hey Scott you should check into Darin's (DofD) build thread he didnt use anything else for the chimes or anything.
GMT900 2500HD Bose Upgrades! Another new SUB post #88 - Ongoing
- Thread starter PenguinLTZ
- Start date
Okay, I will check that out, and send him a PM. Thanks Matt.
No problem 
Darin retained his Bose amp. Okay, now I'm confused 
OHHH yea, he left it there and clipped the speaker level inputs
I actually used the speaker level outputs of the Bose amp and ran those into the high level inputs of the 3Sixty.
Thanks for all the help, Darin. I am waiting for some input from Audio Control right now.
I have an "updated" PAC OEM line converter coming for tomorrow (hopefully), that is supposed to let me run full signal into the amp, and keep a more subtle chime on the L/F channel. That way I can turn up the gains, and run the amp like I should.
With the new component in the Stealthbox, maybe I will be happy
Worth a shot, for now.
I have an "updated" PAC OEM line converter coming for tomorrow (hopefully), that is supposed to let me run full signal into the amp, and keep a more subtle chime on the L/F channel. That way I can turn up the gains, and run the amp like I should.
With the new component in the Stealthbox, maybe I will be happy
Worth a shot, for now.
Well, I got the Stealthbox out, and replaced the sub with the Fosgate.
I fixed all the gain settings, etc, and got it ousnding as good as possible. The Fosgate p3 isn't even broke in yet, and puts that JL to shame. Very happy, I was so skeptical of the shallow subs.
I think I will re-install the Bose amp next, and buy a LC6i to run off the hi level outs from the Bose amp.
Hell, I don't know. What a damn mess:
Amp sitting in the console enclosure, where the bose amp was:
Stealthbox is exposed with console removed:
Stealthobox removed, has a W1V2 in it:
Here is the new Shallow Punch P3 next to the JL:
Wired the DVC Punch for 2 ohms and dropped it in:
The Punch retaining ring wont fit in this recess, so I just put some butyl sealant on the flange and sealed it to the enclosure, and threw some washers on the screws:
Got it back in and bolted down, sealed the bolts, set the gains and filters, and let it rock
In the morning I will make up my mind what I want to do with this mess.
One thing is for sure, all the speakers are done, all running 2 ohm, and all sound great!
I fixed all the gain settings, etc, and got it ousnding as good as possible. The Fosgate p3 isn't even broke in yet, and puts that JL to shame. Very happy, I was so skeptical of the shallow subs.
I think I will re-install the Bose amp next, and buy a LC6i to run off the hi level outs from the Bose amp.
Hell, I don't know. What a damn mess:
Amp sitting in the console enclosure, where the bose amp was:
Stealthbox is exposed with console removed:
Stealthobox removed, has a W1V2 in it:
Here is the new Shallow Punch P3 next to the JL:
Wired the DVC Punch for 2 ohms and dropped it in:
The Punch retaining ring wont fit in this recess, so I just put some butyl sealant on the flange and sealed it to the enclosure, and threw some washers on the screws:
Got it back in and bolted down, sealed the bolts, set the gains and filters, and let it rock
In the morning I will make up my mind what I want to do with this mess.
One thing is for sure, all the speakers are done, all running 2 ohm, and all sound great!
Woooo very nice
99sierraman
[don'tcha know]
What are you doing with the JL?
