buRRp's 1991 V2500 Suburban Build

[buRRp]

Those would look great, I've heard great things about them too

 

[buRRp]

I need a little help. I have been trying to find a quick release links for my front sway bar but have had no luck. Anyone have any ideas where I could find some or what some of the offroad guys use?

I finally found some.
Check these out...
http://www.offroaddesign.com/catalog/swaybarkit.htm

 

[buRRp]

Just a quick update...

Well a couple weeks ago I flushed the radiator and put some stop leak in it to try and stop a small leak. Well it ended up the radiator end tank is wore out so I will be having it redone this Friday. Also found out that the motor for the end gate window is bad and needs to be replace. The window is down and I can't get to the motor so I am still trying to figure that out. Nothing major done lately as I have been very busy with work. Hoping to get time some weekend soon to head out to my buddy's to build the back bumper and do a few other little things.

 

[Truckguy24]

Sounds good Lee! Hope you get everything squared away

 

[RedRider]

You'll want to flush your cooling system real good to get that stop leak stuff out. That stuff can cause more harm than good.

 

[buRRp]

You'll want to flush your cooling system real good to get that stop leak stuff out. That stuff can cause more harm than good.

Yeah I was planning that.

 

[dirtyoldman]

Just a quick update...

Well a couple weeks ago I flushed the radiator and put some stop leak in it to try and stop a small leak. Well it ended up the radiator end tank is wore out so I will be having it redone this Friday. Also found out that the motor for the end gate window is bad and needs to be replace. The window is down and I can't get to the motor so I am still trying to figure that out. Nothing major done lately as I have been very busy with work. Hoping to get time some weekend soon to head out to my buddy's to build the back bumper and do a few other little things.

Might have to replace the end gate.Check your local pick-a-part,might find one cheap.Bring a cordless drill battery with you and a couple of wires so you can jump the wires going to the gate to make sure the motor's still good.I've done similar with a cordless battery.....

 

[buRRp]

Thanks for the tip Gary.

 

[dirtyoldman]

Had a 87 Mustang where the door locks took a shit so went to our pick-a-part,with a battery and tried a few Mustangs until I found one with a good door lock motor....

Sure would be nice if they'd build things so it could be fixed fairly easy

 

[buRRp]

Sure would be nice if they'd build things so it could be fixed fairly easy

Yeah that would be nice.