6 Lug Wheel Bearing/Hub Replacement GMT800

[merlin5577]

Very nice write up. Makes me even more mad I lost the pictures when I did mine!

For those who are curious, with a few exceptions, this is the exact same procedure as on the 2500 & 3500 series trucks.

 

[Bigredmariner]

Very nice write up. Makes me even more mad I lost the pictures when I did mine!

For those who are curious, with a few exceptions, this is the exact same procedure as on the 2500 & 3500 series trucks.

Your write up was still nicely laid out, I checked yours before I did mine and the two are very similar in procedure.

 

[merlin5577]

Very nice write up. Makes me even more mad I lost the pictures when I did mine!

For those who are curious, with a few exceptions, this is the exact same procedure as on the 2500 & 3500 series trucks.

Your write up was still nicely laid out, I checked yours before I did mine and the two are very similar in procedure.

Nice! Glad I was of help.

 

[Black02Silverado]

Thanks for sending me this link Jarrod. I will be doing a friends 04 Suburban tomorrow. Looks like an easy enough job and with my lift it should go smooth!

I'll have access to my air tools with my new compressor so it should go quick.

 

[agjake11]

great write up red.

you can also use an impact to take of the axle nut

 

[buRRp]

 

[nubuilder]

Does this only apply to GMT800 1500's or does it also apply to 2500's/2500HD's and 3500HD's?
EDIT: Sorry, just looked at the title again.


Nice writeup Jarrod! Looks pretty straight forward.