Window Holders

[davbell22602]

I bought these and they work great for holder the window up on a door. Recommended to everyone to buy this right away.

http://www.mactools.com/Product/tabid/120/productid/320679/variantid/311438/Default.aspx

 

[700 sportsman]

Looks pretty slick, I like how they state the obvious "works with all models with a top door frame"

 

[La Bestia]

Looks pretty slick, I like how they state the obvious "works with all models with a top door frame"

You know they wouldn't say that if some dumb fucker didn't try it without the top frame.

 

[ScottyBoy]

When I replaced my regulator I just used a few strips of masking tape over the top of the door frame to tape the glass in place.

I would only buy this if I had a shop and changed window regulators and motors on a regular basis. Other than that, I'll just use a $3 roll of tape.

 

[La Bestia]

When I replaced my regulator I just used a few strips of masking tape over the top of the door frame to tape the glass in place.

I would only buy this if I had a shop and changed window regulators and motors on a regular basis. Other than that, I'll just use a $3 roll of tape.

$3 is a price I can get on board with.

 

[davbell22602]

When I replaced my regulator I just used a few strips of masking tape over the top of the door frame to tape the glass in place.

I would only buy this if I had a shop and changed window regulators and motors on a regular basis. Other than that, I'll just use a $3 roll of tape.

I'd probably use $3 roll tape too if was $100 tool. I dont believe in cutting corners with homemade tools. I like to use proper tool for the proper job for safety reasons.

 

[ScottyBoy]

When I replaced my regulator I just used a few strips of masking tape over the top of the door frame to tape the glass in place.

I would only buy this if I had a shop and changed window regulators and motors on a regular basis. Other than that, I'll just use a $3 roll of tape.

I'd probably use $3 roll tape too if was $100 tool. I dont believe in cutting corners with homemade tools. I like to use proper tool for the proper job for safety reasons.

Taping it like this is pretty safe. Its not gonna fall while you're working on it.

 

[64shortbed]

i bought a single suction cup from a local parts store and put it on the thewindow just above the belt molding when i change out regulators at work. works for all windows

 

[Moeman]

I've had a set for years.Bought them from Snap-On back in the early 90's.They do work well.

 

[OldCracker29]

When I replaced my regulator I just used a few strips of masking tape over the top of the door frame to tape the glass in place.

I would only buy this if I had a shop and changed window regulators and motors on a regular basis. Other than that, I'll just use a $3 roll of tape.