What did you do to your truck today?

[Fordfanatic101]

re tuned to stock cause it started idling rough on my way back from lunch, as if it had a Cam it sounded pretty sweet but was throwing codes left and right. i would clear one code then another would pop up.


so i took it out to the garage checked all the connection, and the MAF sensor, cleaned my Air Filter, then i noticed a screw had fallen out of part of my CA intake not part of the problem but found a new one and proceeded to check all of the other bolts i could.



after this I started it while the filter was drying, it was running fine but threw a Code to much air flow so waited until my Filter dried and re installed. cleared code was running like normal.


I went to too Tune it to Level 3 and noticed all the custom setting were way outta whack.
the Gear Ratio was a 24.33s the Rev limiter was set to 200k i didn't know they went that high


i didn't check anything else i just reset my Edge and everything went back to normal tuned, so i put it on level three started it and everything was fine.


dunno what the problem was i just think my edge malfunctioned but it gave me a good scare

 

[Bigredmariner]

^^ Yeah that would have concerned me too, glad you got it running right again.

 

[Fordfanatic101]

^^ Yeah that would have concerned me too, glad you got it running right again.

yeah i was like don't tell me i screwed something up out at the desert.
but it seems to be all good now but at least i know what my truck will sound like with a Cam now haha

 

[Bigredmariner]

The cam sound is cool when you actually have a loping cam. Mine has done some crazy shit too, but never anything like that one.

 

[CJ Hungus]

The cam sound is cool when you actually have a loping cam. Mine has done some crazy shit too, but never anything like that one.

You need cam J-rod. I saw an LS6 cam forsale on PT.net.

 

[Bigredmariner]

The cam sound is cool when you actually have a loping cam. Mine has done some crazy shit too, but never anything like that one.

You need cam J-rod. I saw an LS6 cam forsale on PT.net.

I have 2 more questions to answer and my sheet is off to Pat_G.

 

[CJ Hungus]

The cam sound is cool when you actually have a loping cam. Mine has done some crazy shit too, but never anything like that one.

You need cam J-rod. I saw an LS6 cam forsale on PT.net.

I have 2 more questions to answer and my sheet is off to Pat_G.

pffft, going the professional route huh.

 

[Bigredmariner]

The cam sound is cool when you actually have a loping cam. Mine has done some crazy shit too, but never anything like that one.

You need cam J-rod. I saw an LS6 cam forsale on PT.net.

I have 2 more questions to answer and my sheet is off to Pat_G.

pffft, going the professional route huh.

Hell yes, $25 bucks is pretty cheap compared to all the parts I would have to throw away if I guessed wrong.

 

[CJ Hungus]

The cam sound is cool when you actually have a loping cam. Mine has done some crazy shit too, but never anything like that one.

You need cam J-rod. I saw an LS6 cam forsale on PT.net.

I have 2 more questions to answer and my sheet is off to Pat_G.

pffft, going the professional route huh.

Hell yes, $25 bucks is pretty cheap compared to all the parts I would have to throw away if I guessed wrong.

meh, just go with what is proven..... thats what I woulda done.

 

[Stumpuller6.5]

ordered a canopy, and a box liner, also started to buy wheels, but just waiting on a price on shipping.