Old77
Full Access Member
Old77's '77 C-10 Build Thread (Pic heavy!!!)
- Thread starter Old77
- Start date
Old77
Full Access Member
Old77
Full Access Member
Old77
Full Access Member
Bedliner sprayed...
Old77
Full Access Member
Old77
Full Access Member
Here's a vid of what it sounds like..... True duals, dynomax headers, Flowmaster 40 Series muffler and stainless steel tips....
Old77
Full Access Member
Put in temp/comp mirror
Before
After
Before
After
Old77
Full Access Member
"Door" in the bed floor has been fastened in. I plan on using Plasti Dip on the screw heads so that they blend with the floor better. Just need to pick some up.
The purpose of this access panel is for ease of getting to the top of the fuel tank for the sending unit rather than having to drop the tank in case that ever needs repair for some reason.
Before
After
The purpose of this access panel is for ease of getting to the top of the fuel tank for the sending unit rather than having to drop the tank in case that ever needs repair for some reason.
Before
After
Old77
Full Access Member
Old77
Full Access Member
Reading through some old threads got me thinking on this and just wanted to get them down somewhere to reference again later on as I think of what I want to do with my truck in the future....
Future Plans (in no particular order)
--LS motor conversion. Most likely 5.3L with a built 4L60e. This is most likely a ways away as my crate motor runs strong but I love the drive-ability of the 5.3/L60e combo.
--Get the AC working
--Soft Touneau cover
--Lower the rear to level it with the front and replace all front end suspension components
--Replace the stock rear with a 3.73 or 4.10 rear.
--New Rims/Tires...not exactly sure what I'll go with yet. Maybe just back to rallies :shrug:
--Rear disc brake conversion
--Exhaust changed to 90 degrees and exiting behind each rear tire (maybe even quieter mufflers)
Future Plans (in no particular order)
--LS motor conversion. Most likely 5.3L with a built 4L60e. This is most likely a ways away as my crate motor runs strong but I love the drive-ability of the 5.3/L60e combo.
--Get the AC working
--Soft Touneau cover
--Lower the rear to level it with the front and replace all front end suspension components
--Replace the stock rear with a 3.73 or 4.10 rear.
--New Rims/Tires...not exactly sure what I'll go with yet. Maybe just back to rallies :shrug:
--Rear disc brake conversion
--Exhaust changed to 90 degrees and exiting behind each rear tire (maybe even quieter mufflers)
