Might be going lower!

[azmidget91]

ok just ordered the spindles, now just need some shackles for the back

Every time I think of shackles I think of rusty shackleferd

 

[RedRider]

 

[che22879]

 

[gmctrucks]

yeah my tires rub right now, thats the reason for getting these smaller tires both diameter and width

Remember getting lower profile tires one has to go slow over bumps or you might bent a wheel.

 

[azmidget91]

yeah my tires rub right now, thats the reason for getting these smaller tires both diameter and width

Remember getting lower profile tires one has to go slow over bumps or you might bent a wheel.

no need to worry about that one is already bent

 

[azmidget91]

i cant wait to go lower....i think i may have the tires mounted tomorrow and that alone will get me down an inch, then just have to drive around with a huge wheel gap for about a week or so until i get the spindles and notch the frame in the back, need to go pick up some steel to do the notch, along with either new torch hoses or a plasma cutter since the hoses on my torch got cut...

 

[RedRider]

Plasma Cutter FTW

 

[mbarclay]

 

[azmidget91]

Plasma Cutter FTW

Yeah its just that $400 jump in price from torch hose to a used cheap plasma cutter off craigslist is a bit steep...

 

[azmidget91]

ok so since one of the tires i got had some cuts in the tread like it was rubbing the fender and i had a nail in the shoulder of one of my current tires i decided to try to get discount tire to warranty it out to the new size, they are doing it and just have to wait till tomorrow for them to get the tire in. mounting the tires and the new warranty and price difference of the new tire from the old tire, came out to $181 so in reality im getting 5 tires worth about $1250+mounting and balancing im getting for $330