Lights bouncing bad

[thewrubelator]

So, ive got 4-8" Pro Comp lights on my bumper. i went wheeling tonight to kinda try eveyrthing out. I aimed the lights and everything, but 2 of them drift down as far as they can go after going over a few bumps. I'm just wondering if anyone else has/had this problem before with thire Off Road lights..if so, how did you make it so they stay where you put them! thanks

 

[dirtyoldman]

I tightened the mounting bolts as tight as I could and just short of busting one.

 

[01f1502wd]

^x2. i dont have very much trouble with mine, hella's mounts are pretty good about not slipping.

 

[Cowboy Cadillac]

I put rubber washers between the regular washers and mounts. Then tighten the bejeesus out of em.

 

[Kennyray]

I put rubber washers between the regular washers and mounts. Then tighten the bejeesus out of em.

+1

 

[Stumpuller6.5]

Tighten the shit out of them, Just make sure you got them were you want them! I`ve had several quad sets of KCs and they needed to be damn tight!!

 

[dietz4ibanez]

Nothing a little tightening and possibly some locktight couldn't fix.

 

[01f1502wd]

Adding lock washers may help asswell


And boom goes the dynamite.

 

[buRRp]

Tight, tight, tight.

 

[bubbatrucklover]

You could try nuts with nylon inserts.