Dodge taking on Ford Raptor?

daddy

I'm too LAZY to Choose a Custom Title!!!
Lifetime Supporting Member
Joined
May 17, 2009
Posts
46,700
Reaction score
72
Location
Pawnee, IN
:facepalm: I don't understand why the big 3 doesn't take all of this R&D and money and put it towards building better standard full size pickups.


They are. It's just like racing in a way. Advancements made in these areas eventually find their way into production vehicles. If all one could engineer for were bland, everyman vehicles, advancement would take forever. Extreme vehicles allow for very progressive thinking and risk taking that just isn't going to be seen in the average production development cycle.

I can understand that, but I fail to see what components from this would be useful in an everyday pickup. Generally people buy trucks to haul and tow stuff. With these trucks, payload and towing is generally cut if half. What good does long travel suspension do for the average Joe? They may be sweet trucks, but I fail to see the point.

It's not just about suspension though. Engines, steering components, fuel pumps, seat belts, etc. are all included in the engineering process.

I hear what you are saying, but even the design methods used, not just the parts, can be learned from and utilized down the road.

Also, there is the cool factor that's needed as well. The Corvette ZR1 is far from an everyday vehicle but they make those too.
 

RebelThunder

Speak English or GTFO
Joined
May 20, 2009
Posts
12,662
Reaction score
0
Location
A Tree Stand
:facepalm: I don't understand why the big 3 doesn't take all of this R&D and money and put it towards building better standard full size pickups.


They are. It's just like racing in a way. Advancements made in these areas eventually find their way into production vehicles. If all one could engineer for were bland, everyman vehicles, advancement would take forever. Extreme vehicles allow for very progressive thinking and risk taking that just isn't going to be seen in the average production development cycle.

I can understand that, but I fail to see what components from this would be useful in an everyday pickup. Generally people buy trucks to haul and tow stuff. With these trucks, payload and towing is generally cut if half. What good does long travel suspension do for the average Joe? They may be sweet trucks, but I fail to see the point.

It's not just about suspension though. Engines, steering components, fuel pumps, seat belts, etc. are all included in the engineering process.

I hear what you are saying, but even the design methods used, not just the parts, can be learned from and utilized down the road.

Also, there is the cool factor that's needed as well. The Corvette ZR1 is far from an everyday vehicle but they make those too.

I hear ya, but everyone has roads where they live to utilize the ZR1. If you don't live in the south, these trucks are basically worthless as you don't have dunes to go play in.
 

daddy

I'm too LAZY to Choose a Custom Title!!!
Lifetime Supporting Member
Joined
May 17, 2009
Posts
46,700
Reaction score
72
Location
Pawnee, IN
:facepalm: I don't understand why the big 3 doesn't take all of this R&D and money and put it towards building better standard full size pickups.


They are. It's just like racing in a way. Advancements made in these areas eventually find their way into production vehicles. If all one could engineer for were bland, everyman vehicles, advancement would take forever. Extreme vehicles allow for very progressive thinking and risk taking that just isn't going to be seen in the average production development cycle.

I can understand that, but I fail to see what components from this would be useful in an everyday pickup. Generally people buy trucks to haul and tow stuff. With these trucks, payload and towing is generally cut if half. What good does long travel suspension do for the average Joe? They may be sweet trucks, but I fail to see the point.

It's not just about suspension though. Engines, steering components, fuel pumps, seat belts, etc. are all included in the engineering process.

I hear what you are saying, but even the design methods used, not just the parts, can be learned from and utilized down the road.

Also, there is the cool factor that's needed as well. The Corvette ZR1 is far from an everyday vehicle but they make those too.

I hear ya, but everyone has roads where they live to utilize the ZR1. If you don't live in the south, these trucks are basically worthless as you don't have dunes to go play in.

There are plenty of places in the North those trucks could be used to have a hell of a time, at least here in Indiana there are. :naughty:
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
28,836
Posts
1,109,352
Members
4,800
Latest member
SpeakerMan
Back
Top