V-band clamps /thread
Corsa and GM BOTH suck
- Thread starter AllBlkdOut07
- Start date
AllBlkdOut07
UMBERTO de magnifico
Although, nice, those won't work. Same concept as the ones I had. The issue is the outer tube doesn't compress enough to tighten on the inner tube.
Some different flanges would probably have to be added to your existing pipe but using these would let you be able to take it all apart if you wanted to instead of having to weld it all up.
Although, nice, those won't work. Same concept as the ones I had. The issue is the outer tube doesn't compress enough to tighten on the inner tube.
NMRam
Still Here Because I'm Not There
Make some relief cuts in the outer flange so it will clamp down on the inner pipe. 
AllBlkdOut07
UMBERTO de magnifico
Make some relief cuts in the outer flange so it will clamp down on the inner pipe.
No, I hate how that looks lol.
fortplainman
Custom User Title
Wait, so you guys all have your exhaust permanently welded on? Eh, that's not an option, cause I like to remove mine from time to time to respray it. If it were welded it would need to be cut off.
I think these preformed clamps will work perfectly since they are bolted to both ends of the exhaust piping.
I just sprayed them flat BBQ black to match the rest of the exhaust.
these came on my MBRP exhaust standard which was half the price of yours
but looks good i should probably do the same to a lot of my undercarriage.
Make some relief cuts in the outer flange so it will clamp down on the inner pipe.
No, I hate how that looks lol.
It'll be under your truck, covered with a clamp and BLACK. No one will see it.
RebelThunder
Speak English or GTFO
AllBlkdOut07
UMBERTO de magnifico
these came on my MBRP exhaust standard which was half the price of yours
but looks good i should probably do the same to a lot of my undercarriage.
Make some relief cuts in the outer flange so it will clamp down on the inner pipe.
No, I hate how that looks lol.
It'll be under your truck, covered with a clamp and BLACK. No one will see it.
Don't matter, I know the cut will be there.
I would be dangerous with that tig welder.
fortplainman
Custom User Title
wait you would actually make your own designs and then build them instead of dealing with mr cool ridiculing all your ideas?
