Bad U-joint symptoms?

[slims]

I'm pretty sure I have a bad u joint on the s-10. What has me puzzled is yesterday I noticed when I push the clutch I don't get resistance till half way to the floor board. It usually gives resistance as soon as you touch it and gives me a work out. Think this is u joint related or I'm Gonna need a new clutch as well?

 

[Kennyray]

I don't think it has anything to do with the u-joint. Try bleeding the clutch.

 

[dirtyoldman]

Hydraulic clutch? Gotta be some way to adjust it

 

[slims]

Idk if its just an adjustment issue. It only just started last night and at the rate it's getting worse makes me think bigger problems . It is hydraulic though.

 

[Kennyray]

Have you checked the fluid level in the master cylinder ?

 

[slims]

Ill go check now.

 

[slims]

The level is good but its brown. Looks like motor oil in there. Don't know why it would be so brown.

 

[Kennyray]

The level is good but its brown. Looks like motor oil in there. Don't know why it would be so brown.

Brake fluid attracts moisture, the brown is from corrosion in the system. I would bleed the system which should also flush it out.

 

[OldCracker29]

 

[slims]

The level is good but its brown. Looks like motor oil in there. Don't know why it would be so brown.

Brake fluid attracts moisture, the brown is from corrosion in the system. I would bleed the system which should also flush it out.

Best place to bleed it from?