Its okay William. Hijack away! 
AutoCal thoughts
- Thread starter mr_bots
- Start date
buckshot85
HorsePower- if it don't scare ya it aint enough
thanks. Looking at a 220 cam for the truck and 3500 stall 
I just don't know when to quit
JennaBear
Sponsor
That is quite a stall. Justin had a 3200 on his SSS and I HATED it!
buckshot85
HorsePower- if it don't scare ya it aint enough
Is it just too aggressive? I was told somewhere between a 3200-3500 stall would be needed.
JennaBear
Sponsor
Cams and stalls are very much personal preference though, so don't take my word for the Bible. I did not like punching the pedal and having hesitation while the stall worked its way up. What I always recommend, is to call the cam company you want to go with, and have them recommend a grind and a stall. There are a lot of internet warriors out there that will swear by certain setups, but it is not for everyone.
I had a 208/212 115LSA on my Tahoe, by most standards it is very mild. It was perfect for what I wanted and needed it for. Definitely do your homework, and don't fall for the flavor of the week on the forums!!
I had a 208/212 115LSA on my Tahoe, by most standards it is very mild. It was perfect for what I wanted and needed it for. Definitely do your homework, and don't fall for the flavor of the week on the forums!!
buckshot85
HorsePower- if it don't scare ya it aint enough
I will deff. take my time researching and contacting companies. I've seen many people like thunder racing cams. Never ran them so might look into them. I've always just used crane or comp cam.
JennaBear
Sponsor
They are all good companies...it just depends on who is the flavor of the week 
We have ran thunder racing cams before with good luck.
Just ran out of regular. Swapped to the 91+ tune and premium fuel. Seems to be a difference in the low-mid range and dropped about a second in 0-60 per the 100% accurate cell phone stop watch. 
Draenor
KILL ALL HUMANS!!!!
Thunder Racing "was" out of Baton Rouge. They closed up shop.
Unless its a custom grind in shop, 9 times out of 10 the company is getting comp or crane cams.
As for stalls I'm just as confused. I contacts several companies and most recommend a 3400+\- stall for my heavy ass truck with the whipple. I thinks it's too high.
As mentioned before, lots of research.
Sent from my overly sofisticated electronic device.
Unless its a custom grind in shop, 9 times out of 10 the company is getting comp or crane cams.
As for stalls I'm just as confused. I contacts several companies and most recommend a 3400+\- stall for my heavy ass truck with the whipple. I thinks it's too high.
As mentioned before, lots of research.
Sent from my overly sofisticated electronic device.
