9 Inch is broken!

[dietz4ibanez]

I was about to say. Appropriate it is but dang... That's kinda something to brag about!

Yeah, I laughed when I pulled the axle shaft out.. i was like ok, I see you big dawg, tearing it up!! lol.

I was trying to think what GM make that you could use but you can't... 10 Bolt was in it from the factory, right?

Yeah that would be a joke... And a 12 is like a slightly modded 10 if you could...

And then once you are at a 14 bolt talk about packing on the pounds!

 

[buRRp]

Damn

 

[66nova]

Dang man! What were you doing?

 

[Bigredmariner]

That's the thing about upgrades, they will always find you weakest parts for you. I found out today that I will need to upgrade injectors if I lay down anymore power. Knock on wood, the transmission is still hanging in there.....

Yeah! More spray for all that new air!! lol...

I would hurry up and give FLT a call on the trans, ive seen a couple 4l60e's let go! lol.

He added a little torque management for me so I would be safe for a while. Hit 11.3 psi of boost and the injectors were at 98% duty cycle.

 

[Alljackedup408]

I was about to say. Appropriate it is but dang... That's kinda something to brag about!

Yeah, I laughed when I pulled the axle shaft out.. i was like ok, I see you big dawg, tearing it up!! lol.

I was trying to think what GM make that you could use but you can't... 10 Bolt was in it from the factory, right?

Yeah that would be a joke... And a 12 is like a slightly modded 10 if you could...

And then once you are at a 14 bolt talk about packing on the pounds!

Yeah, I need either a serious dana 60, or a Fabricated 9 inch, I need to keep it somewhat light. LOL

 

[agjake11]

holy jeez

my materials prof would have a field day with the failures

 

[Alljackedup408]

Dang man! What were you doing?

Well... I was actually just cruising, pulled out onto an empty street, and did a pull, around 6000rpm or so I felt the truck kick out from under me, let out, looked in the mirror and saw 2 fat black stripes... then it turned to only one. lol.

No wheel hop or anything cause I laid into it, not just smash. Idk lol. Im good at trashing stuff.

 

[Alljackedup408]

That's the thing about upgrades, they will always find you weakest parts for you. I found out today that I will need to upgrade injectors if I lay down anymore power. Knock on wood, the transmission is still hanging in there.....

Yeah! More spray for all that new air!! lol...

I would hurry up and give FLT a call on the trans, ive seen a couple 4l60e's let go! lol.

He added a little torque management for me so I would be safe for a while. Hit 11.3 psi of boost and the injectors were at 98% duty cycle.

sweeeeeeeet!! mo boost. now!

 

[66nova]

Im looking on my phone so I can't see the pics too well. Besides axles and caps what is broken?

Looks like to me a set od billet caps, bearings and a good set of axles and you should be rolling again.

 

[Alljackedup408]

Im looking on my phone so I can't see the pics too well. Besides axles and caps what is broken?

Looks like to me a set od billet caps, bearings and a good set of axles and you should be rolling again.

Yeah, Im thinking about maybe changing the whole rearend housing out, make it a bit wider, if not I will be going to 33 spline, billets and new bearings. If i can find a deal on a moser center section, ill do that! craigslist for the win!