Search results

Trying to get some info on MSD box's. I was getting ready to just order a MSD starter saver, but have read some boxes have it built in. My timing is locked at 40 degrees + high compression big block.. Even have about the best starter money can buy, Running 2 battery's. Still have trouble...

Two years ago we built a .060 over 454, for one of mud trucks. Never did get to race it much the first year. Last summer we ran it a few times. Has less than 20 passes on it. Before our last race, we put a .640 lift Solid Howards cam in. And it went all to hell. We broke the cam in like it...

I'm doing some research on manual valve bodies. I don't know anything about them, just very little research... Full manual and there are automatic manual.... And there is like a 50-100 dollar difference. I will be doing a full manual in one of our trucks more than likely. But has anyone...

On my K5 blazer, Rear shaft rear joint. It has the internal clips (Don't know if thats what they are called, but has the clips on the inside) .. I knocked the old joint out, And the new one in, with no hammer... Just pushed them out with my hands..:ohnoes: Thats not normal, Has anyone ever...

Used to mud race this Blazer a few years back. Now i've decided to get back in the sport. But i'm going to be going through the whole blazer front to back. Probably will be a slow build. And havn't nailed down some things but here are the pictures i've got so far. Hahaha, Some of my...

Have a set of new pistons for a 400SBC ..030 oversize. For use with 5.565 (Stock) rods. Flat tops with 4 valve reliefs, Asking 200 TYD... Wrist pins also included. :chipper:

Well many moons ago(08), i sent my 400 block to get bored and crank polished. While waiting, I got pretty sick and ended up in the hospital. I had a buddy pick the motor up, He started to put the bottom end together, When he found the rods were roached...So i just had him put it in storage.When...

Well, Good new and bad news. Bad news, I've givin up on my last boat for the time being :'( The reason..... The good news, I found this incredible deal. 1984 Cajun Bass boat. Its a sweet rig, The only issue is the rub rail looks beat up pretty good. All around the boat...

MshqTy2-XTI gE5l3h2j1NA My buddy owns the Blue S10 blazer And the Red 90 Chev.. The S10 blazer has been sitting with no drive train for a few years. And he decided he was going to take both so he through it together. The Red Chevy is a truck hes been building for awhile now. After...

A few vids A4KxZll9RvA After a small fire on Memorial Day weekend :( Cave in Rock, Illinois nupmuAMw21M I'm on a boat! jhE-Be5VNdc July 29th weekend uxkXS4ZT73U July 4th weekend. 7ClC5ZFlw0c :spoon: :dunno: :tmc:

:tmc: Been busy ain't been on here much :( ... Was snapin some pics of the boat today on the river and figured i'd get one of this and post it. When i get the rest of the pictures up i'll post some :D :cheers

Well.. I've had my boat for 2 years now... Last year i replaced the trailer and the engine... This year i'll be finishing rewiring the whole boat... And new carpet.. And floor.. And changing up some things... I have not had the boat out this year yet.. And i'm ready to get back out there... Here...

Hey guys i need some help on a 2000 Ford Taurus ive been working on. When i started out i had 7 codes.... I have fixed all those codes but one. Copy and paisted from a taurus forum :rolleyes: ============================================ I have a 2000 Taurus 3.0L Duratec... Have had a...

On memorial day Me and a couple buddys went boating and i pulled them on the tube awhile... And At the end of the day we strapped the tube to the back of the boat.. on the ski pole... And i guess the tube kinked the fuel line.... Causing one cylinder to run lean...When i got home i pulled the...

A couple nights ago on the way to work..... i was meeting a white suv and as we was getting ready to pass each other he came into my lane to miss a deer... that he was easily going to miss... and it forced me off the road into a good size doe... i went off the road ...bumper wrapped around front...

Anyone happen to go to trucks gone wild down in Missouri this past weekend... My buddy has my old suburban ... And had it down there... I aint seen too many pics or vid's yet.. But i think i got a couple

Well ive been chasing a stupid miss in my boat:uhoh: ... At idle and anything below 2000rpm It ran awful... Ive been troubleshooting it Since i bought the boat... Everyone that i asked about it said it was normal... Ive taken it to people and started it on a garden hose .. And they said it was...

What kind of wipers do you all use...:ohnoes: I use the Rain-X Latitudes with Rain-x fluid.:loser:

Well First race was saturday... Only for 3 pics lol... I forgot my camera.. This is my buddys shortbed he just built... He ran an s10 body for 3 years and Finally got out of that ghayarse craze and got into a fullsize...BBC..5.13's Its pretty wicked..

What it all means Axle Codes (LS=Limited Slip / Traction Lok): F-150: 19 – 3.55 Non-LS 18 – 3.08 Non-LS H9 – 3.55 LS B6 – 3.73 LS F-250: 27 – 3.31 Non-LS 26 – 3.73 Non-LS Ranger: 84 – 3.45 Non-LS 86 – 3.73 Non-LS 87 – 4.10 Non-LS 89 – 4.56 Non-LS F6 – 3.73 LS F7 – 4.10 LS 92 – 3.08...

Well i just restore my trailer... I wire brushed the whole trailer (grinder with a brush wheel on it)... Primer'd and Painted the whole trailer gloss black... Installed all new LED's submergable lights.. and harness New 1500lb winch.. and strap 1500lb Jack Reese receiver coupler Bow roller...

http://i752.photobucket.com/albums/xx163/bobkyle2/Boat%20and%20Fish/0312011442.jpg ^^^ Little wabash bridge

So this is the first time ive ever owned a truck with 2 different sets of tires.. Some people have said not to rotate from side to side.. and im not going to rotate from front to back.. ..:dunno: What do you guys think ... This will also be my first set of tires im going to be mature about and...

So for Valentines day i got my ol lady some new wheels and tires for her car.. I thought i had a pictrue of her projector headlights too but i dont.. But i got them for her for christmas 1999 Pontiac Grand Prix gt Got the wheels from discounttiredirect.com CHEAPPPPPPPP!!!!... i gave...