What do these fit?

[The_Chupacabra]

$60...tops

Really? Seriously? $60 for all 4?

That's what I'd pay. The tires are none matching and are used. IMO, I am sketchy on purchasing any used tire. What is the manufacture date on the tire? There should be a 3 or 4 digit number on the sidewall after the DOT. The style of wheel is outdated. You may squeeze $80 but would be pushing it.

Tires are no good.

$60 tops and with the tires removed. The buyer shouldn't have to pay another $10-20 to have them un-mounted. If they don't see there is always the scrap yard.

I dont know what the going rate is on rims at the junkyards. But over here Steel rims go for $20-30 and aluminum goes for $40 each with no tires.

Soooo I think you just answered your question, If you are going to sell them for 60 total then just unmount the tires and junk them for cash.

All of this thread for junk.

 

[davbell22602]

Then your best bet is to take them to the scrap yard!

I'll keep them for doing that. I'll find car that steel rims and swap the them out and sell them with the car.

 

[davbell22602]

$60...tops

Really? Seriously? $60 for all 4?

That's what I'd pay. The tires are none matching and are used. IMO, I am sketchy on purchasing any used tire. What is the manufacture date on the tire? There should be a 3 or 4 digit number on the sidewall after the DOT. The style of wheel is outdated. You may squeeze $80 but would be pushing it.

Tires are no good.

$60 tops and with the tires removed. The buyer shouldn't have to pay another $10-20 to have them un-mounted. If they don't see there is always the scrap yard.

I dont know what the going rate is on rims at the junkyards. But over here Steel rims go for $20-30 and aluminum goes for $40 each with no tires.

Soooo I think you just answered your question, If you are going to sell them for 60 total then just unmount the tires and junk them for cash.

All of this thread for junk.

Fixed. I meant to say thats what sell for a piece.

 

[Draenor]

I dont know what the going rate is on rims at the junkyards. But over here Steel rims go for $20-30 and aluminum goes for $40 each with no tires.

I'd pry them tires off and hit the yard. We only get about $20 for an aluminum wheel of that size.

 

[The_Chupacabra]

Just junk them and take the cash, noone that is looking for rims for a 4 lug car are going for that rim anymore. You will have a hard time selling them and if you do you wont get much for them.

 

[daddy]

Nah, $600 is more fair. They're antiques and all.

Your you serious or you just messin with me?

I'm as serious as you are.

You are now going to go hunt down a car with steel wheels that these will fit so you can swap them and then sell the car? WTF is wrong with you? Then what, a "How much are these POS steel wheels worth?" thread?

Jesus, Dave, you ask questions of the group then repeatedly ignore their answers in favor of some half-cocked pipe dream. And you wonder why people get irritated with you, your threads and your nonsense.

Tell us your final decision on these wheels before I close it in the next hour.

 

[davbell22602]

The recycle place here is only paying $8 or 10 for aluminum wheels without tire and $6 with tire.

 

[The_Chupacabra]

Ok, $32-40 bucks or nothing because noone will buy those POS wheels and they may not buy the car because those wheels are on it.

JUNK THEM AND BE DONE WITH THIS NONSENSE!

 

[davbell22602]

Why junk something thats still good? It be different if they were rusty and bent up steel rims.

 

[daddy]

Why junk something thats still good? It be different if they were rusty and bent up steel rims.

Still good?

They fit a bunch of vehicles that barely exists anymore and in the case you do find a car with the particular lug pattern and offset requirements, who in the **** is going to buy those ugly pieces of shit? NO ONE.

Take them and scrap them for whatever cash you can get out of them.

How much did you pay for them?