Camming the kid's 5.3? No, we got a 6.0 :)

[svensk]

Re: Camming the kid's 5.3

I concur with the Pat-G.

 

[66nova]

Ah oh! This is where it starts.

 

[PenguinLTZ]

Re: Camming the kid's 5.3

http://www.guerragroup.com/camshaft_help.htm

Thanks, Jarrod.

 

[Bigredmariner]

Re: Camming the kid's 5.3

It's only $25, pretty cheap for pro advise.

 

[PenguinLTZ]

Re: Camming the kid's 5.3

It's only $25, pretty cheap for pro advise.

Yep, I will have him do it.

 

[PenguinLTZ]

Re: Camming the kid's 5.3

Carl!! WTH, I see you in here

 

[CJ Hungus]

Re: Camming the kid's 5.3

Everyone has really touched base on what I was going to say. I think the 269 cam is perfectly fine for a mediumish 5.3 build. It's bigger than Dan has in his 6.0. Pair it with a 3k stall and it will move very nicely.

 

[PenguinLTZ]

Re: Camming the kid's 5.3

Thanks man, I appreciate it.

 

[CJ Hungus]

Re: Camming the kid's 5.3

Rod bolts, hardened push rods, springs and timing chain while you are in there.

I would 100% recommend a 3000 converter to get the most out of this setup. I'd do a custom spec cam probably something with some advance ground in to help the low end. The cam you picked is very mild

Yeah, we have that on the list.

Nothing off the shelf available for the advance from anybody?

With a 3k stall you won't need a ton of low end.

 

[CJ Hungus]

Re: Camming the kid's 5.3

Thanks man, I appreciate it.

And I would recommend circle d for the verter.