Aux Battery in my 2008 F150

OG-Larryw1

The wisdom of so many!
Joined
Jun 17, 2010
Posts
566
Reaction score
0
Location
El Cajon, Ca
does it seem the same with that intake?

Actually my truck seems to pull harder. but I only drove it last night. I will see.
the guys at JLt said it should work better than the K&N mainly because the AM meter is bigger and lets in more flow so it develops more HP.

but I already don't like the Magnaflow sound at high rpm or when I have my foot into it. I am going back today to complain.
 

Trent

mmmm beer
Joined
Sep 30, 2010
Posts
936
Reaction score
0
Location
Durham, NC
Do you have a Gryphon or scan gauge that can display air intake temperature? Just curious how the differnece is
 

Zembonez

живи свободно или умри
Lifetime Supporting Member
Joined
May 17, 2009
Posts
57,295
Reaction score
36
Excellent Larry!

Thanks for the writeup! :thumbs:
 

OG-Larryw1

The wisdom of so many!
Joined
Jun 17, 2010
Posts
566
Reaction score
0
Location
El Cajon, Ca
Do you have a Gryphon or scan gauge that can display air intake temperature? Just curious how the differnece is

I have an sct x3 and I don't know if I can see that but I should look and see what is avail on my hand held
 

OG-Larryw1

The wisdom of so many!
Joined
Jun 17, 2010
Posts
566
Reaction score
0
Location
El Cajon, Ca
JLT Filter replaced

I went to Fibertech to get a Sock for my filter. I wanted to have protection when in the desert or off roading. I was told I could special order one. but then as I looked at what was avail. I notice this K&N on one of there display buggy's. LS1 motor 1000 HP I asked about the filter which is a stock item. and the Socks were in stock. I was worried about a restriction. but the guys at fibertech said if it worked well on tere motor my stock 5.4 will be fine. so Here is the look now.

IMG_3634.jpg
 
Joined
Jan 8, 2010
Posts
1,047
Reaction score
0
Location
Ramona CA
I went to Fibertech to get a Sock for my filter. I wanted to have protection when in the desert or off roading. I was told I could special order one. but then as I looked at what was avail. I notice this K&N on one of there display buggy's. LS1 motor 1000 HP I asked about the filter which is a stock item. and the Socks were in stock. I was worried about a restriction. but the guys at fibertech said if it worked well on tere motor my stock 5.4 will be fine. so Here is the look now.

IMG_3634.jpg

that looks familiar :D i cleaned my Filter yesterday. do to some running rough issues that seemed to have been caused by my Edge but everything seems to be good now that i checked everything and cleaned my Filter and reset my Edge :thumbs:
 

OG-Larryw1

The wisdom of so many!
Joined
Jun 17, 2010
Posts
566
Reaction score
0
Location
El Cajon, Ca

that looks familiar :D i cleaned my Filter yesterday. do to some running rough issues that seemed to have been caused by my Edge but everything seems to be good now that i checked everything and cleaned my Filter and reset my Edge :thumbs:

It's always good when you find an answer to rough running. :thumbs:
 
Last edited:

Staff online

Members online

Latest posts

Forum statistics

Threads
28,836
Posts
1,109,350
Members
4,800
Latest member
SpeakerMan
Back
Top