I need help identifying some car parts

[NWSCREW]

They look to belong to the 326ci....??

 

[NWSCREW]

The older Pontiac's were sleepers, some of the Tempest were mean muther f******....

 

[Kennyray]

All pontiac V-8's looked alike. those valve covers will fit any Poncho V-8

 

[davbell22602]

OK, So were down to Pontiac V8 valve covers. What years? 1950's-1970's?

 

[Zembonez]

OK, So were down to Pontiac V8 valve covers. What years? 1950's-1970's?

That's about it!

Pre emission control years were pre 1968.

 

[davbell22602]

Ok, Thanks guys I'm scrapping the hood and sandblasting the valve covers to sell.

 

[Texas Jim]

OK, So were down to Pontiac V8 valve covers. What years? 1950's-1970's?

"IF" they are for the 389... it was produced from 1959 thru 1966.

 

[Bernie]

The hood is from an '84 E-150 or 250 (350 didn't use the 4.3 I'm pretty sure) and the valve covers are pre-'68 because there's no PCV port, but post-1950 because there is a breather port.

 

[davbell22602]

The hood is from an '84 E-150 or 250 (350 didn't use the 4.3 I'm pretty sure) and the valve covers are pre-'68 because there's no PCV port, but post-1950 because there is a breather port.

Ok, so the valve covers are 1950-1968? Thanks

 

[Texas Jim]

The hood is from an '84 E-150 or 250 (350 didn't use the 4.3 I'm pretty sure) and the valve covers are pre-'68 because there's no PCV port, but post-1950 because there is a breather port.

Ok, so the valve covers are 1950-1968? Thanks

Actually Pontiac didn't come out with a V8 till 55...so it has to be '55 or later.
The 389 came out in the 1959 Pontiac.

(to me ...they look like 389 valve covers.) ... for sure.