Opinions wanted on exhaust exit location

[KillaF150]

dont have access to a welder and dont trust my self to get it done right. and dont want to half-ass it with clamps.

I'm the same way man. you could always do some pricing at different shops. that's what i did.

 

[agjake11]

plan on it tomorrow

 

[KillaF150]

plan on it tomorrow

what's your current setup?

 

[agjake11]

stock back to a 3" Dynomax Race Bullet then out with 3" tip as pictured above. but the problem is the exit goes straight back then turns on a 90 to the muffler and there isnt enough room to do an angled exit without moving it

 

[KillaF150]

stock back to a 3" Dynomax Race Bullet then out with 3" tip as pictured above. but the problem is the exit goes straight back then turns on a 90 to the muffler and there isnt enough room to do an angled exit without moving it

Gotcha. well, a turndown would be easiest, but if you like the look you have now i'd just get the SS tip. but that's me.

 

[agjake11]

think i could do a turn down for the same as beefing up the brackets holding the pipe that keeps coming off

 

[KillaF150]

think i could do a turn down for the same as beefing up the brackets holding the pipe that keeps coming off

Don't see why you can't. worse comes to worse you can just do the turndown and leave it a done deal.

 

[agjake11]

exactly, just needed the truck to take to the shops to explain what i want

 

[agjake11]

Hmm might be some changes.

found this stock exhaust on craigslist

 

[DV2000NJ]

Dump it!

Hacking off my tips is probably the simplest thing I've ever done to the truck, but also one of the best.