Here is the procedure to replace the brake pedal sensor.
xTooltipElement
Service Information
[Related Documents \/]
2011 GMC Truck Acadia - 2WD | Acadia, Enclave, Traverse VIN R/V Service Manual | Document ID: 2151824
________________________________________
Brake Pedal Position Sensor Replacement
Brake Pedal Position Sensor Replacement
Callout Component Name
Preliminary Procedure
Remove the left instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
1 Brake Pedal Position Sensor Bolt
Caution: Refer to Fastener Caution.
Tighten
3 Y (27 lb in)
2 Brake Pedal Position Sensor
Procedure
1. Disconnect the brake pedal position sensor electrical connector.
2. After the installation is complete, calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration.
© 2014 General Motors. All rights reserved.