La Bestia
resident tool whore
It's 20%. It was pre cut for my truck. I got it from ebay from the same seller that Dan got his from after reading his thread. Can't remember the seller off the top of my head, maybe Dan will have it.
In the how to section there is a thread about tinting windows... I read that after I did mine
. Instructions that come with the tint say either use tint application solution or a mix of 97% distilled water and 3% baby shampoo. I used the water & shampoo method. After the windows were cleaned I sprayed the window with solution then sprayed the inside of the tint film then as I was peeling the film off sprayed the outside or glued side. That keeps the glue from setting until you have it where you want it.
Once it's all thoroughly sprayed just place it where you want it and start smoothing it down pushing the solution out and letting it stick. Others talk about special squeegees and such, I used my drivers license. Just make sure the inside stays well lubed too so you don't scratch the tint and it's pretty straight forward. Like I said not professional results but the cost savings will buy a lot of Hamms.
In the how to section there is a thread about tinting windows... I read that after I did mine
. Instructions that come with the tint say either use tint application solution or a mix of 97% distilled water and 3% baby shampoo. I used the water & shampoo method. After the windows were cleaned I sprayed the window with solution then sprayed the inside of the tint film then as I was peeling the film off sprayed the outside or glued side. That keeps the glue from setting until you have it where you want it. Once it's all thoroughly sprayed just place it where you want it and start smoothing it down pushing the solution out and letting it stick. Others talk about special squeegees and such, I used my drivers license. Just make sure the inside stays well lubed too so you don't scratch the tint and it's pretty straight forward. Like I said not professional results but the cost savings will buy a lot of Hamms.
