ford4wd08
Taking it one modd at a time....
ok well a few of you guys have asked for this so here is my attempt. first youll need some switches and regulator assemblies.
my part list
swithces: (i highly recommend these from A1electric, they worked ver well for me)
http://www.a1electric.com/Merchant2/...&Category_Code=
regulators: ( i went the OEM route and bought motorcraft from tasca)
http://www.tascaparts.com/partlocato...?siteid=213668
part numbers:
4L3Z1523201CA REG ASY-FRT DR WDO-L
4L3Z1523200CA REG ASY-FRT DR WDO-R
now once you have all your parts in hand we can get to the install. first youll need to remove your door panels and the peel the waterproofing back. (ill assume you know how to do this if youre gonna do this install yourself).
next you need to loosen the bolts that are on the clamp that hold the window itself. in the picture in red circle is a clamp. you need to roll down the window to get to the clamps on one side and through a hole in the door panel you can access the other. when theyre loose you need to roll the window up and then tape it with masking tape in the up postion. this will hold it up while you work on the other regulators. and make sure you use alot of tape. if you have tint i reccomend the blue tape so it will come off easily.
then you have to remove the bolts that hold the regulator to the door panel. there is 6 of them on the manual one ( when you put the power one in it only requires 5) circled in red are the locations of the bolts and if theyre not all in the picture you can find them im sure.
once you have them loose you have to kinda of twist the regulator together and fight it out of there ill show a pic
then its basically the same thing in reverse to replace it. then the directions show pretty well with the switched how to wire them up. you just have to feed them across the truck. i know this isnt the best writeup but its what ive got lol
my part list
swithces: (i highly recommend these from A1electric, they worked ver well for me)
http://www.a1electric.com/Merchant2/...&Category_Code=
regulators: ( i went the OEM route and bought motorcraft from tasca)
http://www.tascaparts.com/partlocato...?siteid=213668
part numbers:
4L3Z1523201CA REG ASY-FRT DR WDO-L
4L3Z1523200CA REG ASY-FRT DR WDO-R
now once you have all your parts in hand we can get to the install. first youll need to remove your door panels and the peel the waterproofing back. (ill assume you know how to do this if youre gonna do this install yourself).
next you need to loosen the bolts that are on the clamp that hold the window itself. in the picture in red circle is a clamp. you need to roll down the window to get to the clamps on one side and through a hole in the door panel you can access the other. when theyre loose you need to roll the window up and then tape it with masking tape in the up postion. this will hold it up while you work on the other regulators. and make sure you use alot of tape. if you have tint i reccomend the blue tape so it will come off easily.
then you have to remove the bolts that hold the regulator to the door panel. there is 6 of them on the manual one ( when you put the power one in it only requires 5) circled in red are the locations of the bolts and if theyre not all in the picture you can find them im sure.
once you have them loose you have to kinda of twist the regulator together and fight it out of there ill show a pic
then its basically the same thing in reverse to replace it. then the directions show pretty well with the switched how to wire them up. you just have to feed them across the truck. i know this isnt the best writeup but its what ive got lol
Last edited:
