Need some leveling advice

[junior3815]

Well I'm trying to decide exactly what I want to do. I currently have the stock keys turned up but not maxed. I could go up more but the left front sits lower at the moment so i wouldnt be able to turn the passenger side key much more. I have 3 inch rear blocks at my house that a buddy gave me for free. If I bought aftermarket RC keys would it completely kill the ride quality if i made all four fenders the same height if I added they keys. And how bad would the angles be on the front A arms? I already have Bilisten 5100's btw

 

[daddy]

That front end won't like any more lift via the torsion bars, be it more turning or new keys either one. You either need to get a body lift or a regular suspension lift if you want to go higher without knowingly causing harm to your front end.

 

[junior3815]

That front end won't like any more lift via the torsion bars, be it more turning or new keys either one. You either need to get a body lift or a regular suspension lift if you want to go higher without knowingly causing harm to your front end.

Damnit not what I wanted to hear. I absolutely have to fix the drivers side sitting lower but I guess I can sell the blocks and just use the money I wanted to use on the kit for something else

 

[RebelThunder]

Post pics of your CV, BJ and TR angles as it sits now. Could be your torsion bars are worn out.

 

[junior3815]

okay so

passenger side

drivers side

 

[RebelThunder]

Ya I wouldn't crank anymore. I'd either get a BL or a 4" suspension lift and then crank the bars down till the truck sits that same side to side.

 

[junior3815]

My truck will never have a BL. I guess i aught to start saving.

 

[daddy]

 

[PenguinLTZ]

Driver's side can stand a bit more. Level it out.