- Joined
- May 17, 2009
- Posts
- 57,295
- Reaction score
- 36
Looks too hillbilly if you ask me. Like they couldn't afford to buy the right wheels. It's different on a 4WD lifted rig for sure though.
It's time for another wheel thread
- Thread starter Bowtie2Sierra
- Start date
Mine were perfectly flush with the top of the fender even with the 305's. I wish I had a lengthwise view.
RebelThunder
Speak English or GTFO
I didn't ask you though 
Decisions decisions. The good news is that I think that will be the wheel so that decision is close to being made.
I'm after a little bit of a wider stance and I don't mind if the wheels stick out a tad.
Tobias - Did you have the full 2 1/2" leveling kit on the truck? If I remember your posts about that set up, you didn't have any rubbing or if you did it seems like it was minor at just the right angle. Is that right?
I'm after a little bit of a wider stance and I don't mind if the wheels stick out a tad.
Tobias - Did you have the full 2 1/2" leveling kit on the truck? If I remember your posts about that set up, you didn't have any rubbing or if you did it seems like it was minor at just the right angle. Is that right?
I had only the 2" kit. Didn't want it 100% level.
As for the rubbing - only very little in reverse at full lock and even then it was intermittent based on angle.
What is the front-runner?
As for the rubbing - only very little in reverse at full lock and even then it was intermittent based on angle.
What is the front-runner?
I've narrowed it the 3 below. The Centerline is the front-runner with the other 2 tied for second.
1. Centerline Bigfoot with a smooth lip and possibly having the rivet circles smoothed as well.
2. Black Rhino Zambia. These are discontinued but Discount Tire has a few left. They are similar to the current Black Rhino Robberg except these are polished.
3. Ultra Mako in silver. The shiny center cap bothers me though.
1. Centerline Bigfoot with a smooth lip and possibly having the rivet circles smoothed as well.
2. Black Rhino Zambia. These are discontinued but Discount Tire has a few left. They are similar to the current Black Rhino Robberg except these are polished.
3. Ultra Mako in silver. The shiny center cap bothers me though.
I have the old school RC 2 1/2" leveling kit when they were adjustable. I really would like to be able to clear with only the small plate (1.5" I think) but I wouldn't mind going up to 2" if I had to. I don't want to go more than 2" though. If I get to that point, I'll look at a 1.5" BL if I can talk my wife into it. She thinks anything higher than stock is too redneck. Living in Arkansas + a "redneck" truck in the garage might be more than she can handle.
1. Bigfoot* w/ smooth lip and no circles
2. Bigfoot* w/ smooth lip
3. Mako
4. Zambia
5. A different wheel
6. Bigfoot* with words on lip
*With logo-less cap. They can be had.
2. Bigfoot* w/ smooth lip
3. Mako
4. Zambia
5. A different wheel
6. Bigfoot* with words on lip
*With logo-less cap. They can be had.
You seem to have a good eye for wheels on GM trucks so I'm happy that ranking. 
I'm horrible at figuring this stuff out which is why I haven't bought wheels since '03.
I'm horrible at figuring this stuff out which is why I haven't bought wheels since '03.
Might as well order up some nice rotors, some ceramic pads and some caliper paint and get it done! 
