4th Gen Ram seats in an 07

[Alljackedup408]

Few months ago buddy of mine got 4th gen seats.. and we got em mounted in his 07.... that has been totally customized now... ford sterling silver paint and all kinds of goodies... well the Laramie seats are all power... so he finally got a week off work.. yesterday came over and we wired em up.

Out of all of these plugs... just one hot and one ground made all the seat movements work. This is just a temp wiring job for our keys trip, his Bachelor party. After we get back we will find factory plugs.. and make a nice harness... want to get the heated/cooled seat features working.

I have to say.. these 4th gen seats are SOOOOOO much better than the 3rd gen.













and on Saturday doing a 500 mile check on the new lift.. and changing out a moog ball joint... zerk fitting was screwed up.. moog warrantied it!

 

[OldCracker29]

 

[Texas Jim]

Nice job Brian...

 

[DofD]

Looks good!

 

[NMRam]

Looks good! The 4g seats are WAY better than the older ones!


The yellow connector is the side airbags...you probably won't need that one. All the other functions should be in the other connector.

 

[Alljackedup408]

Looks good! The 4g seats are WAY better than the older ones!


The yellow connector is the side airbags...you probably won't need that one. All the other functions should be in the other connector.

I used my fluke and could find nothing.. after cutting the air bag we tested power to different terminals.. the whole seat gets it's power through the Yellow SRS connector. Weird lol.

 

[NMRam]

I had seen a link on another forum for 4g wiring diagrams. I will see if I can find it and if there is anything for the seats listed.

 

[NMRam]

Here is a link to the site with the wiring diagrams...

https://techauthorityonlinedemo.extra.chrysler.com/service/repair/wiring/view/classic.htm