Search results

Could not having everything plugged in also affect this at all? Basically, nothing on the dash is plugged in at all. I'm thinking about plugging in the headlight controls. The lights under the dash aren't even lighting up. I would think that the truck would think that the doors are open since...

What I did was match the colors with the pin-out on the large A-pillar plug. I then labeled all the wires one by one as I cut them. I will try to re-trace them, but I didn't undo the entire harness the second time around. I left the foam insulation on the wires (kept them a lot neater). Where...

It needs switched power (or ignition), ground, and reverse signal (if I can find a convenient location to get that; or else I'll skip it). Can I get the ignition power behind the radio? Or any where easy to get to right now? Honestly, I don't see what's wrong with my current wiring. All the...

My dash is out so behind the radio is SUPER easy. :D I thought about CAT5E, but I wanted to keep everything factory color-coded. Plus, you'll never know unless you remove everything. I'm just really confused right now....and I still need to figure out where to run the wires for the...

Some more wiring info for the radio plugs (I'm just trying to get all my info in one spot)

I'm re-searching all the threads I looked over a long time ago to double check myself. I triple checked all my wiring before I left the truck this evening. Here's the wiring for the DIC plug to the radio...or at least I think this is right. 7 = dark green - RAP Fused Supply (tap into DRK...

Yeah, I wish the truck tires I wanted were that cheap and had that kind of warranty!! I'll be looking at $800-850 all said and done with maybe a 50k warranty with this same promo. Thanks Jim! :zembonez:

Alright, a little short notice, but there's a Buy 3, Get 1 Free sale going on here I have Monday and Tuesday to get in and buy the tires (I'm just gonna buy them now and schedule the install at a later time). I need to pick out and get tires for my brother's car. It's a 1997 Dodge Stratus with...

$3.41 / $3.44 / $3.71

Got my Z71 back from my buddy. He had it yesterday to tow his demo-derby car. I missed my truck!!! :D Started working on the ZR2 and the overhead console....didn't go as well as planned. Ran into a fairly big problem. :frustration: (see thread)

Congrats Michael! :cheers: Thanks Shanin!! :tmc:

UPDATE Finally started working on this today! I used 2 wiring harnesses. Both were fully un-taped. One was used as the "good" one and the other was cutup and used to lengthen the other harness. I did this to keep everything in the factory color-coding scheme. Little problem.....it's not...

Weird. I've got 14k miles and almost 3yrs on the ones in my Z71 with no problems. Sure hope I have the same luck with the ZR2! :fingersx:

Group 1 4. Matt Kenseth (17) Group 2 11. Kyle Busch (18) Group 3 15. Tony Stewart (14) Group 4 22. Jamie McMurray (1) Group 5 29. Joey Logano (20) Group 6 41. Joe Nemechek (87)

Why's that? What kind of issues? :dunno: In the Z71, I have 2 of the exact same ones. (on that, the front 2 were one number, and the back 2 a different number, all 4 are Bosch; the S10 had all 3 the same)

For the Z71? I'm working on getting the missing parts for the S/C. Waiting to hear back. I don't want to put power back to the truck without everything back in it. I don't feel like having my dash light up like a Christmas tree. The truck hasn't had power since I removed the dash/ECM, and...

$3.38 / $3.41 / $3.68

:puke:

October 10, 2011 Installed my exhaust (MagnaFlow 93227 and Gibson 614434) along with new oxygen sensors (3x Bosch 15703). See thread here.

Preface My S10 is a '98 4.3L ZR2. MagnaFlow does not make a header-to-post-cat piece that is for my truck, however they do make one for a '00. The difference is that the flange after the cat is a 2-bolt VS the 3-bolt that my truck had. So I went with '00 parts for both pieces. From what I can...

Group 1 5. Matt Kenseth (17) Group 2 12. Jeff Gordon (24) Group 3 15. Jamie McMurray (1) Group 4 25. Tony Stewart (14) Group 5 32. Dave Blaney (36) Group 6 39. Joe Nemechek (87) Almost forgot this!!!

$3.39 / $3.45 / $3.69

I'm just gonna order the lock. I'm only out $20 if it doesn't work. Well, no wiring is gonna happen this weekend. Its suppose to be like 80* and my dad is going out on the river....so instead I will be swapping the exhaust and installing my CAI. If I get that all done (and I better), I'll...

I was gonna go with a '98 Blazer, but I might see what they've got for a '99 just to be on the safe side. Never mind. The '99 Blazer has the same part number. They don't list any locks for the S10 at all (from '98 to '01 at least), only for the Blazer for '98-'99. That makes no sense.

Yeah, that's what I thought. I guy shattered his windshield removing his though. :ohnoes: There's gotta be a trick to releasing the clip. :dunno: I'll mess with it Saturday. Anyone have any thoughts on the door lock cylinder?