Chevy Lean

[Alljackedup408]

Torsion bars could be weak... springs could be weak... depends man!

 

[daddy]

Solid-axle conversion and a good lift kit should straighten it all out for you.

 

[junior3815]

Solid-axle conversion and a good lift kit should straighten it all out for you.

Ill be sure to hop right on that one

 

[cRiPpLe_rOoStEr]

You must check it carefully for any sign of damage in the frame when you recrank it.

Solid-axle conversion and a good lift kit should straighten it all out for you.

 

[DV2000NJ]

Bag it.

 

[buRRp]

Solid-axle conversion and a good lift kit should straighten it all out for you.

Ill be sure to hop right on that one

Here ya go..... SAS Conversion kit....

http://offroaddesign.com/catalog/88-98SolidAxleConversion.htm

 

[cRiPpLe_rOoStEr]

Bag it.

That's also a good idea. I must confess I like those electropneumatic suspensions...

 

[Black02Silverado]

Elliott, Dean's Wheel Alignment in Goldsboro could help you out with this if you want. They are great. All good advice above to follow as well.

 

[junior3815]

Okay well i actually measured everything out and i have 37 1/2 as the fender height for both rear fenders 37 and 1/2 for the left front and 38 and 1/2 for the right front. So would that be strickly torsion bars?

 

[CJ Hungus]

Okay well i actually measured everything out and i have 37 1/2 as the fender height for both rear fenders 37 and 1/2 for the left front and 38 and 1/2 for the right front. So would that be strickly torsion bars?

I would say yes, since only the front is effected.