GATOR CREW
“Man is not free unless government is limited.”
SOOOOO close, but not quite there.
- Thread starter DV2000NJ
- Start date
Sounds like you need to lose a few pounds, fatty. 
Flowmaster is not the problem here.
A set of 245 street tires would get you in the 13s
GREAT JOB DAN!
Well, it's not so much the Slowmaster holding me back (which with the amount of air I'm moving, I'm sure it is a bit), as it is the pipes after it. They're non-mandrel bent 2.25", and are probably close to 2" at some of the harsher bends.
DEFINITELY not working well with a cammed 6.0.
Awesome man!
I'm fairly certain that you'll beat me now
Once you get tuned, I'm thinking you would have me. We need to get you down to Atco at some point this summer.
Congrats man.
Dan is on the verge of having a 13 second minivan!
Congrats Dan
Sounds like you need to lose a few pounds, fatty.
If they would have let me run in flip-flops and shorts, I think I could've had 13s.
- Joined
- May 17, 2009
- Posts
- 57,295
- Reaction score
- 36
Flowmaster is not the problem here.
A set of 245 street tires would get you in the 13s
GREAT JOB DAN!
Well, it's not so much the Slowmaster holding me back (which with the amount of air I'm moving, I'm sure it is a bit), as it is the pipes after it. They're non-mandrel bent 2.25", and are probably close to 2" at some of the harsher bends.
DEFINITELY not working well with a cammed 6.0.
It's possible, but 2 2.25 inch pipes should flow more than the 6.0 dishes out even with some tight bends. You'll have to see if there are any positive results from your upgrade.
If you could snag some street tires and wheels (lighter and shorter) I bet you'd pick up another tenth or two easily.
I still say GOOD JOB! That 6.0 swap is running good!
Flowmaster is not the problem here.
A set of 245 street tires would get you in the 13s
GREAT JOB DAN!
Well, it's not so much the Slowmaster holding me back (which with the amount of air I'm moving, I'm sure it is a bit), as it is the pipes after it. They're non-mandrel bent 2.25", and are probably close to 2" at some of the harsher bends.
DEFINITELY not working well with a cammed 6.0.
It's possible, but 2 2.25 inch pipes should flow more than the 6.0 dishes out even with some tight bends. You'll have to see if there are any positive results from your upgrade.
If you could snag some street tires and wheels (lighter and shorter) I bet you'd pick up another tenth or two easily.
I still say GOOD JOB! That 6.0 swap is running good!
I have something in the works for wheels and tires.
They're the same size, but with less rolling resistance, and a better distribution of mass (more towards the center than my current setup). Oh, and they're free (AKA sitting in my shed).
Before the summer's up I want to make a couple 2wd passes on some 28" slicks or DRs.
- Joined
- May 17, 2009
- Posts
- 57,295
- Reaction score
- 36
That would be cool...
I think your new exhaust setup is going to sound much better no matter how much it helps with flow. You still getting Robert's setup to use with your muffler?
I think your new exhaust setup is going to sound much better no matter how much it helps with flow. You still getting Robert's setup to use with your muffler?
