1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

The Cbercfab SIlverado

Discussion in 'Hobbies and Time Wasters!' started by buRRp, Aug 28, 2017.

  1. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    Picked up this Wroncho roller after I sold the Bomber. Here are a few pics from the previous owner.
    [​IMG][​IMG][​IMG][​IMG]
     
  2. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    It has a custom bent V1 Cbe Switchback chassis with wraith skid, trans, axles and Incision RC Wraith links. Axles also have Incision spools with Axial HD gears and Vp VVD's up front, VP diff covers front and rear and knuckles, c-hubs and lock outs. Dlux fab U4 axle trusses front and rear. Wheels are 2.2 VP Roosts with Crawler Innovations foams and Pit Bull Rock Beast 2 tires. Electronics areTekin Pro4 3300kv motor and a Castle Creations MMP. A Hitec 7954 does the steering duties. Might be a custom skinz from FreqEskinz coming soon also.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  3. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    And the start of the upgrades
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
  4. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    Picked up some DIY parts from Scalerfab to start the rear bumper and fairlead mount. [​IMG][​IMG]
     
  5. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    Using a set of Scalerfab.com Wraith sliders and a custom width pre-runner rear bumper with raised bumper brackets also
    [​IMG][​IMG][​IMG][​IMG]
     
  6. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    Got my fairlead/skid plate welded on today.
    [​IMG]
     
  7. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    Today I stripped the orange off the body . Didn't get all the orange off in some of the seems but it looks good I think. Also put on some FreqEsKinz half wrapz....
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
  8. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    On the truck...
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
  9. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    Few outdoor pics...
    [​IMG][​IMG][​IMG][​IMG]
     
  10. buRRp

    buRRp Moderator

    Age:
    41
    Posts:
    39,589
    Likes Received:
    1
    Joined:
    Oct 3, 2009
    Location:
    Crookston, MN
    Started on the lights for this build. Got the heads and tail light housings installed and tested. Now just need to finish wiring it up.
    [​IMG][​IMG][​IMG][​IMG]
     

Share This Page