EvilRed ( New Heart ) 410 CI Nitrous Fed

skeet

EvlRed 10 Sec Club
Joined
Sep 12, 2010
Posts
233
Reaction score
0
Location
Port Arthur Texas
Cool David. Good to hear of progress. Looking forward to more.


im looking forward to getting it back lol once the cam gets here i'll install it and drop the motor back in, yeah james wasnice enoughto let me use his shop to do all the work.


looking into a 9" and th400
 

66nova

Doctor Bob - Fastest Doctor Around
Lifetime Supporting Member
Joined
May 21, 2009
Posts
7,534
Reaction score
54
Location
Fort Worth, TX
Awesome build man:thumbs:

What does your truck weigh?
 

skeet

EvlRed 10 Sec Club
Joined
Sep 12, 2010
Posts
233
Reaction score
0
Location
Port Arthur Texas
Awesome build man:thumbs:

What does your truck weigh?


thanks, 4016 with me in it, would like to get it below that but dont wanna hack it up. thinking about doing upper and lower control arms.. and a few other things. just dont know yet..
 

CJ Hungus

Moderator
Lifetime Supporting Member
Joined
May 31, 2009
Posts
24,025
Reaction score
5
Location
Ham Lake, MN
Any particular reason your builder went with 410 cubes rather than the popular 408?
 

skeet

EvlRed 10 Sec Club
Joined
Sep 12, 2010
Posts
233
Reaction score
0
Location
Port Arthur Texas
Any particular reason your builder went with 410 cubes rather than the popular 408?


i bought a used block which was already bored .030 over, when the block was prepped i got a call and was told i needed to come check the block out, i thought the worse lol but it wasnt the case, i asked what was wrong on the phone and my builder told me he didnt like the piston fit that there was to much slop between the piston and the bore, i asked reccomendations? he mentions it might be ok, i basically said im not into might be ok so bore it .040 and make sure its right.. so basically the bore had to much slop so we bored it another .010 ..
 

CJ Hungus

Moderator
Lifetime Supporting Member
Joined
May 31, 2009
Posts
24,025
Reaction score
5
Location
Ham Lake, MN
Any particular reason your builder went with 410 cubes rather than the popular 408?


i bought a used block which was already bored .030 over, when the block was prepped i got a call and was told i needed to come check the block out, i thought the worse lol but it wasnt the case, i asked what was wrong on the phone and my builder told me he didnt like the piston fit that there was to much slop between the piston and the bore, i asked reccomendations? he mentions it might be ok, i basically said im not into might be ok so bore it .040 and make sure its right.. so basically the bore had to much slop so we bored it another .010 ..
Sweet deal. :thumbs:
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
28,729
Posts
1,103,014
Members
4,702
Latest member
Wendell
Back
Top