Search results

nice George :thumbs: I want to go to the desert next week. For Sat night, wana come down and stay here at my house we can do a run. bring another truck with you. I;ll see if my friend with the jeep wants to go. he just bought a 2007 jeep

I just sold my old Exhaust! to helps offset my cost. :) Now I just need to sell my K&N and SCT to offset my new intake and new SCT

Stop teasing us so where is the video?? :dunno: :jester: Here is my first time to use You tube http://www.youtube.com/watch?v=SRRH98VGN_A

Here are more pics, The exhaust is quieter than before. It sound more throaty off idle but not as loud in the higher rpms. but I will see in a couple of miles. it will change.

My right manifold warped!!! The guy at the shop said they sound deep and throaty He said they sound real good. a nice combo. Of course I din't hear them. :dunno: the truck was cooling down. they said after the initial warm up they cool the truck down undo the right mount and jack up...

I have had some that lasted. but the thorleys I ran on my Gmc cracked about every 3 months thorley wty them three times I am paying for the three year - 36,000 mile wty just in case. the headers were 400. and they cut down the labor to 4 hrs. so I bought the wty. the whole thing was $5 more...

Went buy the shop to see what is up with my truck. I see the stock manifolds was warped on the back cyl and that is where the leak was. I will give the stuff to ford They have the old 3" exhaust from the cat back sitting on the floor they have the left header installed the right...

can hardly wait to get my truck back. I don't like leaving it at shops.

I should get my truck back sat. maybe the shop will let me take some pics during the install I will need to go by the shop. but I will get some pics after I pick it up. Me too, I can hardly wait! That is going to be nice when you get the roush installed California :lame: On my GMC I...

This morning when I started my truck I heard a tick - exhaust leak at the right hand manifold. I always (in the past) say when I pull a manifold, it is a good time to install headers. even though my truck is under wty. I smiled this morning and said to myself 'HEADER TIME" so I went for a new...

Nice!!!! When it come time for my brakes I will be thinking about the rotors and pads. :thumbs:

:fume: Ok! I will wait! Just remind me. I am old and forgetful :dunno: :lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol::lol:

wel add what you want to your profile and I will copy and past it in my Nomination of your truck.

So next week I am going to pull your info and nominte you. I am waiting until it closer to the 11th - 15th. So post any new mods in your list and make sure all your data is right. you know for the other forum. Maybe you and I can battle :ohnoes: :fingersx: anyway, we can get som more "yak"...

Once I get my intake I am going to start the work and I will take pictures if you want me to start a new thread when I am ready to show the install I will.

I woud love to On my older trucks I used a solenoid as the isolator. I mounted it close to the main batt. I ran a battery cable from the main + side battery to one side of the isolator. then I did the same from the aux. Battery to the other side of the Isolator. I also ran a power wire to the...

I am going to install a 2nd battery behind the Drivers head light area. The CAI needs to be taken out. A battery box needs to be installed. I also need to install an isolator. I have a junction block to install also. I have ordered an new JLT Ram Air intake system which will allow me to open...

No, not the same The MX6009 is a longer shock.

Mine are the MX6 009 yours are the MX6 079 ????? in the spec list it shows the 079 also goes with a 4x4 with a 0 -1" lift http://4wheelonline.com/Products.aspx?CategoryId=333&ProductId=117042

That is a good question Let me go look at the #'s

My Shocks are good! Jack your truck up and see how much room you have on your shocks. Mine are fine. Don't forget to mark where your shock sit when you are on the ground.

My 5" block is a replacement for the stacked 2" + 3" When I did the Pro Comp 6" I received the 3" to add to my stock 2" I called and asked why they stack blocks? Pro Comp said that it's just how they do it! So after looking into what is ok or not I found that the best choice would be to have...

me too! :thumbs:

"WOW" Looking for the Prop. Valve I was told Dealer item $508.00 my poor friend!!!!!!! I did locate used ones at a couple of diff wrecking yards. $75 but first I think I will pull his and open it to see how it looks. I am curious. the Calipers 41.48 each exch. the M/C 41.50 new those...

no problem! Since I have joined I am trying to put my 2-cents in and use the forum for help. So Far everyting is good here. I have enjoyed my time spent logged in. I can hardly wait for my t-shirts. They should be here next week. I will wear the T On Various outings with my truck!!!