Search results

well in a few hours I'll be playing one of the best pranks I've ever had, using my truck. Video to come...

ok maybe not all credibility but damn near almost all of it is lost. unless you've got each spokesperson showing up and in the same video the tests are usually going to be manipulated. Personally I like the diesel shootout for the 2010s that was done on wardsauto.com personally I find it a...

when the chevy truck spokesman shows up at the "independent" tests it loses all credibility

yeah I saw his dynomax video but I personally like the magnaflow sound that he had previously.

Quick question about the four cats on my year's truck. I know that the first two are the typical DO NOT REMOVE under penalty of law kind of cats. But are the back two some kind of other cat? Someone told me that there was a possibility that they were "resonator cats" and that if they were I...

thanks man, I wanted to go full blown replacement bumper but with gas the way it is I thought I would stick with this. Hopefully it serves me good (if it ever gets on the fucking truck. Azmidget said he should be able to weld up some brackets for me so here's hoping:ohnoes: as for now I'm going...

Dude that's crazy. bad news, westin is saying that they're producing all of their units as 1 for 1 right now. Meaning only 1 mounting system per grill guard. So basically the best they can give me is, sorry your fucked. as for drperry, you should call asap because they're saying that any mounts...

contact with the ground? wtf did you do to your truck?

thanks for the info. I called westin today but it was after closing. I'm hoping because they still make the guard that they will still make a kit to attach it and that it won't be as expensice (maybe $50+ shipping). I spoke with Super Duty Head Quarters (SDHQ) and they said the kit existed but...

Hey guys I finally picked up a grill guard with a couple lights pretty cheap off of craigslist, just wondering if anyone had experience with getting the mounting brackets and nuts separately and what it cost them. I'm hoping for no more than $50 but it will be what it is. Anyone have some...

found my baby a grill guard. AWE YEAH! $115 for a westin grill guard and two off road lights

still a similar process

wow man good eye! yeah after my grandfather (RIP) had his legs run over by a semi while working roadside i'm very careful to be as safe as possible. ps- the semi incident didn't kill him; the heavy smoker part did

Here's the stuff you'll need 3 quarts of 75w-140 4-8 ounces of Friction modifier 3/8" bare wrench funnel high temp red RTV silicone some flat head screw drivers steel wool razor drainage pan EDIT: Author's note- you may consider removing the spare during this process. It can sometimes be a...

ok guys i'm pretty sure that whatever is causing this is a bad PCM or IAC, however if the IAC is controlled electronically will I still be able to remove the motor from the tb and see if it moves? This article says that if I disconnect the IAC I should be able to see it moving when its not...

ok, I knew there was an IAC that plugged in electronically, just wasn't sure if you could clean it

tried setting it back to stock and driving it around but the highest idle I got was maybe 550. So for now I'm on the edge with custom idle set up a little higher. I just want the piece of mind that if I turn it back to stock it will still operate fine

how? I only know how to clean the tb. how do I clean the iac?

no codes, no running lean, just won't run at high enough idle. tune as in like on a dyno? I currently have an edge thats holding the idle high enough I just want the peace of mind that the truck can operate properly without it

2004 F150 Fx4 with the 5.4l engine 3 valve I did the gotts mod and reset the PCM by unhooking the battery for 30 min, however I didn't go through the suggested process that the owners manual says to (drive it 10 miles etc.) Started having problems where it would idle but die as soon as I gave...

Hey guys just a quick question for all yall I was wondering if any of the Ford techs here know what all is updated on a PCM reflash. Currently I have a low idle while stopped at a red light (400-500RPM). I'm wondering if a PCM reflash will correct this. I've already done everything I can think...

i hope so, that engine sounds and rides amazing

yeah it's definitely a truck worth shelling out the cash for. although if I were in the market for one I would probably go with the 3.5 ecoboost in march. as for test drives making you want a new car it's a little different for me, personally it's fun but nothing beats the familiarity of your...

Sorry guys probably should have addressed that. The former solenoid was prone to having water drip on it where it runs off below the windshield and into the engine bay when being washed or rained on. Common symptoms are random grinding noises when driving in any mode (4hi 4lo and 2hi). The new...

yeah they're awesome