Recent content by lilfroger

You might want to look at GlowShift also. They have some good deals on their packages. As for the over head .. more than a few folks have had issues with the ones that stick to the windshield below / behind the mirror. The heat / cool of summer doesn't do good things for the adhesive sent...

The mounts don't cross over to an aftermarket replacement. If you feel like taking the bulb out of the mount ... sure there are other manufactures there. But for just a few bucks each it was worth it for me to buy them from the dealer and not mess with the plastic.

:)

To replace the HVAC Control light's on a 3rd Gen The dash bezel must come out Removal of Dash Bezel 3 Mopar Dash lights (part # 05013815AA) must be purchased from dealership. Thanks to Dave at James O'Neal Dodge for the prompt delivery! From the back of the HVAC control the 3 bulbs...

Because I don't have power in the passenger seat it should tuck under there nicely if we decide to go that route :)

These are all parts we've been collecting for a while. Getting everything together to do one big install weekend so we don't have to pull the dash a million times. Those plastic clips can only take so many remove / re-installs before they give up the ghost. So it was a busy weekend but it was...

The radio speaker is on the bottom of the radio. With the leg mounts there is good sound through the dash. If after having it in for a bit I decide I want better / louder what ever sound. There is a port on the back of the Cobra for an external speaker. Just need to listen to it for a bit to...

Purchased Seat covers direct from Wet Okole Ordering Note ** If you order a vivid or unusual color even if you select no swatch ... they will send you a swatch and they will wait to process your order until you call and confirm. You will also get a call concerning your order as the on-line...

Before this install there was a trans temp gauge in the drivers side dash pocket. The pocket is somewhere in the shed but for the life of me I can't find it. So the dash is going to have to be pulled again when I get a new one in. So while I had planned on running to the hobby store and...

To Remove dash bezel see: DIY - Removing / replacing your 3rd Gen radio bezel. Purchased a Cobra 19 DX IV. This radio was chosen for it's small footprint: Length: 7 Width: 4.5 Height: 1.75 A new bezel was obtained from Dave via James O'Neal Dodge. The stock unit could have been used; but...

I've been running Pro-Comps on my CTD for several years now. They hold up to the weight & wear / tear very well. Tow a 24' toy hauler w/ them regularly and the E-Rating stands up great. Good road manners. I spend a lot of time in the wet and they do pretty dang well. I do tend to skip the...

I think that was my first thought when I saw it. These cars bump and grind a little to often as it is. You get a hot track like Houston and it's going to be the nastiest of nasty. I don't think the drivers or the cars need to be put at risk like that. It also made it to hard to actually...

Hypertech makes a scanner / calibration tool Speedometer Calibration - Part #752001 Jet Performance makes two staged chips Stage 1 - Part # 90902 The other thing to remember is the 4.7 is in the Dakota also. So look through Dak stuff and call and check their usage in the Ram. Take away the...

If you get it clean you might want to also hit it with Por 15 to keep them from rusting back up.

They can ... it just takes body work :lolup: