Almost definitely.
AllBlkdOut07
UMBERTO de magnifico
Okay, now that we actually have a clue as to what you want, go to a machine shop and tell them you want a 1/2" piece of aluminum cut into a bat symbol with a threaded collar on the back that you can screw onto your shift handle. I will almost guarantee no one makes these already.
1/2 inch may be too thin. I say have it CNC'd out of a 2" billet alunimum.
Okay, now that we actually have a clue as to what you want, go to a machine shop and tell them you want a 1/2" piece of aluminum cut into a bat symbol with a threaded collar on the back that you can screw onto your shift handle. I will almost guarantee no one makes these already.
1/2 inch may be too thin. I say have it CNC'd out of a 2" billet alunimum.
**** it! Go with 4"!!!
B
batman
Guest
my shaft has the press on shift knob....so i was thinking about having it made with 2 flanges on each side..then use a collar clamp..kinda like a scope mout does,,,as far as sharp metal..i was thinking i could have them round the edges and points enough to take the edge of them...what do yuns think about that?
Okay, now that we actually have a clue as to what you want, go to a machine shop and tell them you want a 1/2" piece of aluminum cut into a bat symbol with a threaded collar on the back that you can screw onto your shift handle. I will almost guarantee no one makes these already.
Darth Bama
Zombie Control Specialist
Wow, all this talk of knobs and shafts...geez guys.
Gotta love Google images: bat shift knob
This one is $40
FLOOR MATS!
