OldCracker29
I've been knocked down drug out and left for dead
Looking good.
Few changes to the truck....
- Thread starter ford4wd08
- Start date
Looking good.
ford4wd08
Taking it one modd at a time....
tint goes on tomorrow and im gonna put some truck bed liner on my toolbox tonight in the garage, then im gonna try to clean the whole truck up real good tomorrow and post some good pics since i FINALLY got all that chrome shit off! both sides! it took about 10 hours combined. oh yea HIDs will be here saturday cant wait! 
and im gonna put some truck bed liner on my toolbox tonight in the garage, then im gonna try to clean the whole truck up real good tomorrow and post some good pics since i FINALLY got all that chrome shit off! both sides! it took about 10 hours combined. oh yea HIDs will be here saturday cant wait! 
Boilerup15
Hate Milk! Got Beer?
sweet! I got my HID fogs in tonight, probably gonna install them tomorrow.
Nice
bigredstx
If they don't scrub, they're not big enough
- Joined
- Feb 21, 2010
- Posts
- 604
- Reaction score
- 0
looks good 
ford4wd08
Taking it one modd at a time....
ok mom took her camera with her to florida so all i have are cell phone pics but they aint bad.. love the tint, feels like im driving under a shade tree all the time ha, still finishing the toolbox, but it should be on tomorrow and i should have my HIDs in tomorrow night man i missed summer and modding my truck ha!
man i missed summer and modding my truck ha!Attachments
Last edited:
Z71_Silvy
I'm too LAZY to Choose a Custom Title!!!
- Joined
- Jun 3, 2009
- Posts
- 1,693
- Reaction score
- 0
Explain.
I want to remove mine as one side is shiny and the other side is dull.
I'm not digging the 5+ hours though...and my truck is bigger...
ford4wd08
Taking it one modd at a time....
well its gonna be a pain in the ass ill tell you now. just a heads up before you start, but the best way is to get a buddy and a heat gun and/or MAP torch ( i know torch! but it worked and didnt burn anything if you had it on low) and heat it up. then get a razor scrapper or something similar and peel up a corner. grab that corner with some big ass channel locks, vise grips, whatever you have and pull the shit out of it! it helps if your friend heats it as you peel it off, like he heats right where you just pulled it off from. after you get it off, if its like mine was, it will have this foam/ adhesive left behind. from there i got adhesive remover and sprayed it down good and then i hit it with some WD-40. then you just kind of rub it off with a good rag but it takes a long ass time to rub it off! dont try to do it all in one day, spread it out over a week or something. best of luck to you, but the finished product should be great!
Z71_Silvy
I'm too LAZY to Choose a Custom Title!!!
- Joined
- Jun 3, 2009
- Posts
- 1,693
- Reaction score
- 0
well its gonna be a pain in the ass ill tell you now. just a heads up before you start, but the best way is to get a buddy and a heat gun and/or MAP torch ( i know torch! but it worked and didnt burn anything if you had it on low) and heat it up. then get a razor scrapper or something similar and peel up a corner. grab that corner with some big ass channel locks, vise grips, whatever you have and pull the shit out of it! it helps if your friend heats it as you peel it off, like he heats right where you just pulled it off from. after you get it off, if its like mine was, it will have this foam/ adhesive left behind. from there i got adhesive remover and sprayed it down good and then i hit it with some WD-40. then you just kind of rub it off with a good rag but it takes a long ass time to rub it off! dont try to do it all in one day, spread it out over a week or something. best of luck to you, but the finished product should be great!
Pass. I'll just deal with it...or buy new doors and a bed.
ford4wd08
Taking it one modd at a time....
well its gonna be a pain in the ass ill tell you now. just a heads up before you start, but the best way is to get a buddy and a heat gun and/or MAP torch ( i know torch! but it worked and didnt burn anything if you had it on low) and heat it up. then get a razor scrapper or something similar and peel up a corner. grab that corner with some big ass channel locks, vise grips, whatever you have and pull the shit out of it! it helps if your friend heats it as you peel it off, like he heats right where you just pulled it off from. after you get it off, if its like mine was, it will have this foam/ adhesive left behind. from there i got adhesive remover and sprayed it down good and then i hit it with some WD-40. then you just kind of rub it off with a good rag but it takes a long ass time to rub it off! dont try to do it all in one day, spread it out over a week or something. best of luck to you, but the finished product should be great!
Pass. I'll just deal with it...or buy new doors and a bed.
i told you it wasnt easy ha, if i was working like i will be starting tomorrow i would have never got it done, but seriously buy a new door and bed? i would at least take it to a shop and see what they would quote you to take it off.
